MTX 5
08-23-2011 | 09:02 AM
#691
The bulk of the aluminum pieces you see on the car come from an extrusion. This cuts down on cnc time tremendously and greatly reduces scrap. Die sets to form the extrusion still have to be made. Think of the play dough toy where you put the dough in the chamber and then force it out of a thing and it makes spaghetti or a tube etc...
08-23-2011 | 09:32 AM
#693
Tech Fanatic
Joined: May 2004
Posts: 846
shipment to us dealers begins around 9/15,
street price in the us should be around $550. full parts support
will be ready for shipping also! manual will be available soon so for
those wanting to use titanium screws can check if the x4 kit can
be used!
street price in the us should be around $550. full parts support
will be ready for shipping also! manual will be available soon so for
those wanting to use titanium screws can check if the x4 kit can
be used!
08-23-2011 | 10:10 AM
#694
Tech Apprentice
Joined: Jul 2011
Posts: 95
On mugen Website, I read:
We have updated the pictures of our new 1/10 GP Touring Car MTX-5. Here you can get more detail pictures from the the following link! The expected shipping date will be around the end of August.
08-23-2011 | 10:27 AM
#695
Tech Fanatic
Joined: May 2004
Posts: 846
indeed, shipping to distribuitors, and from distribuitors to dealers will be around 9/15 at least in USA so expect an additional week to arrive to your lhs and just to let you know backorders are being placed for the first batch!
08-23-2011 | 10:50 AM
#696
Tech Apprentice
Joined: Jul 2011
Posts: 95
08-24-2011 | 01:15 AM
#699
Joined: Mar 2006
Posts: 5,120
From: www.moorebankraceway.com
I question the idea the alloy is cheaper to produce than the plastics, theories or not, when a replacement plastic bulkhead is costing $12, and the alloy more like $45, where is that theory holding water then?.
Look at all the electric cars, switch to alloy and carbon and the prices went through the roof, we are seeing the nitro cars not do the same (if you ignore Capricorn), but you can't avoid that the prices of the newer alloy parts 'are' more expensive, so someone has it wrong somewhere.
Look at all the electric cars, switch to alloy and carbon and the prices went through the roof, we are seeing the nitro cars not do the same (if you ignore Capricorn), but you can't avoid that the prices of the newer alloy parts 'are' more expensive, so someone has it wrong somewhere.
It doesn't cost anywhere near $45 for them to make that part, more like $5 at the most. Like MugenDrew said the parts are all extracted. we say "CNC'ed but this is wrong, you can see the cut marks on a CNC'ed part, whilst all RC alloy parts are smooth which implies they are extracted or made in a mould.the reason car kits are more exxy now is that the consumer percieves a higher value in something that is filled with carbon fibre and bling alloy. It looks a million bucks, manufacturers know this, so they charge more.
We don't live in the dar ages, metal, especially common types like the ones used in RC aren't that exxy, we the consumers percieve it to be, so the manufacturers take advantage of this
Don't believe the hype.for example look at the old T1 xrays or the corallys of 8 or 9 years ago. They had carbon fibre, 7075 diff outdrives, kevlar belts and alloy baulkheads, they were no where near as expensive as most electric kits now, and they had the same amterial as the kits of today.
08-24-2011 | 04:12 AM
#700
Tech Adept
Joined: Oct 2009
Posts: 139
From: Italy
The increased cost of the baulkhead is probably the manufacturer making more money off us It doesn't cost anywhere near $45 for them to make that part, more like $5 at the most. Like MugenDrew said the parts are all extracted. we say "CNC'ed but this is wrong, you can see the cut marks on a CNC'ed part, whilst all RC alloy parts are smooth which implies they are extracted or made in a mould.
the reason car kits are more exxy now is that the consumer percieves a higher value in something that is filled with carbon fibre and bling alloy. It looks a million bucks, manufacturers know this, so they charge more.
We don't live in the dar ages, metal, especially common types like the ones used in RC aren't that exxy, we the consumers percieve it to be, so the manufacturers take advantage of this Don't believe the hype.
for example look at the old T1 xrays or the corallys of 8 or 9 years ago. They had carbon fibre, 7075 diff outdrives, kevlar belts and alloy baulkheads, they were no where near as expensive as most electric kits now, and they had the same amterial as the kits of today.
It doesn't cost anywhere near $45 for them to make that part, more like $5 at the most. Like MugenDrew said the parts are all extracted. we say "CNC'ed but this is wrong, you can see the cut marks on a CNC'ed part, whilst all RC alloy parts are smooth which implies they are extracted or made in a mould.the reason car kits are more exxy now is that the consumer percieves a higher value in something that is filled with carbon fibre and bling alloy. It looks a million bucks, manufacturers know this, so they charge more.
We don't live in the dar ages, metal, especially common types like the ones used in RC aren't that exxy, we the consumers percieve it to be, so the manufacturers take advantage of this
Don't believe the hype.for example look at the old T1 xrays or the corallys of 8 or 9 years ago. They had carbon fibre, 7075 diff outdrives, kevlar belts and alloy baulkheads, they were no where near as expensive as most electric kits now, and they had the same amterial as the kits of today.
08-24-2011 | 04:51 AM
#701
Tech Lord
Joined: Aug 2007
Posts: 14,051
From: Holland
The only thing what is cost efficient with using aluminium parts is that no mold has to be created or changed when a small change in the part has to be made. Just change the drawing and send it to the machine.
But indeed, everyone is saying that aluminium is cheaper but at the end we are paying a lot more.
08-24-2011 | 05:33 AM
#702
Saying that the parts are extracted is not correct. The parts comes from extracted material (a bar of aluminum) but then you have to CNC the part as you want to obtain a piece. This is the same process as the one used to obtain a rod or a piston for an engine. Parts are smooth because of the quality of the CNC process and the fact that part are brightened with other products that put the cnc marks away.
Rods are forged from billet. Pistons are either machined from billet or low pressure cast.
08-24-2011 | 12:33 PM
#704
Tech Apprentice
Joined: Jul 2011
Posts: 95
