9LikesLosi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
05-05-2011, 04:26 PM
#8702
last nite running 15 t with the 5.5 tekin and rx8 i came off the track consistently at 148-150 degrees F speedo at 98 or less.
HOWEVER the ambient temp was about 50 and really windy so something must be up if its unsoldering wires
HOWEVER the ambient temp was about 50 and really windy so something must be up if its unsoldering wires
05-05-2011, 04:39 PM
#8705
What ESE Chris ? I run a SC4X & RX8 and never have a issue (14T). I know that we all have set our battery limiters to about 80% so teh ESE's do not draw full load. I have seen many at our track have leads come undone and it is almost always caused by amp draw...
05-05-2011, 04:45 PM
#8706
thats right man
05-05-2011, 04:51 PM
#8708
If he's using our motor with the suggested esc and settings he should not be having heat issues.
If he's throwing too much timing at the motor it can cause the wires to unsolder,etc.
Proper esc settings and gearing are required with a truck this heavy.
If he's throwing too much timing at the motor it can cause the wires to unsolder,etc.
Proper esc settings and gearing are required with a truck this heavy.
05-05-2011, 05:01 PM
#8709
I guess you choose to ignore the point.....They are stripped before I even get out my Losi tools. I guess I got the one bad truck that the 13yo making .25 day was lacking in his duties.
I haven't stripped a screw in my xxx-sct either....not the point.
The fact is the screws in the Ten are crap...soft, and not anywhere near hard enough.
I haven't stripped a screw in my xxx-sct either....not the point.
The fact is the screws in the Ten are crap...soft, and not anywhere near hard enough.
05-05-2011, 05:03 PM
#8711
I know there are all kinds of variables but their suggestions are a VERY good starting point.
05-05-2011, 05:35 PM
#8712
Tuesday at practice, running the Novak system, 4.5 & Novak Pro SC ESC 14/40 for gearing, aftger 15mins, motor was 150 & ESC was 105.
Ryan who runs our track has been trying out the CC 3800 & SCT ESC and still has temp issues with running a 16T pinion. Thinking more then likely its the sidewinder esc causing the issues and cant handle the weight of the losi and the demand of use.
Ryan who runs our track has been trying out the CC 3800 & SCT ESC and still has temp issues with running a 16T pinion. Thinking more then likely its the sidewinder esc causing the issues and cant handle the weight of the losi and the demand of use.
05-05-2011, 05:37 PM
#8713
Here is my buddy kyle at 702 rc raceway for this weekends big race escpecially with the new ae 4x4 there and he looked like he will probably be winning lol - http://youtu.be/yW4I9Oen7aA
05-05-2011, 05:41 PM
#8714
Suspended
are you guys refuring to the the ten-scte here? if not i was going to ask what you think of the 4x4 now that it is out there. i want to pick one up tommorow but want to make sure this thing is the real thing. thankyou
05-05-2011, 05:46 PM
#8715
Suspended