1/12 forum
In converting a 1/12 scale I have had to a Novak Havok brushless, I am going to rebuild the diff and should I just get the smallest spur gear I can find? I was leaning to a 76 tooth Kimbrough gear but if anybody suggests a better one I am willing to learn.
The car is a Carpet Knife 3.2R, if that narrows my options or not.
The car is a Carpet Knife 3.2R, if that narrows my options or not.
In converting a 1/12 scale I have had to a Novak Havok brushless, I am going to rebuild the diff and should I just get the smallest spur gear I can find? I was leaning to a 76 tooth Kimbrough gear but if anybody suggests a better one I am willing to learn.
The car is a Carpet Knife 3.2R, if that narrows my options or not.
The car is a Carpet Knife 3.2R, if that narrows my options or not.
Pro Lite Spur Gear-71 tooth, 64 pitch
https://www.ssl-stormerhobbies.com/c...s&pn=PRS6471PL
PRS Gears are very durable, have space for 12 balls, perfect for 12th scale.
Someone made an IROC Z28 body also...... I remember a lights out race that used headlights and tail lights.
Jeff
I was going to put my Ballistic 13.5 in it with a 1s LiPo from Promatch, just need some 16 gauge wire and a Novak voltage booster. I thought about getting a LiFe receiver pack but the pack would weigh 40 grams and the booster only weighs 13 or so. I probably won't have the whole thing complete by this Sunday, and as Sunday is Easter it wouldn't matter anyway, but I hope to get it done and that big speed control shoehorned in, balance the rear pod, things like that.



2991Likes
