Team Associated RC8Be Thread
03-16-2011 | 07:08 AM
#4366
So I took out all my electronics last night for some light cleaning before my track day next weekend (actually all weekend since wife will be out of town!!
). When tightening the screws on the radio tray I might have stripped those two out. Where do you guys buy screws at? I saw some on towerhobbies but I don't need 10 of them. Does anyone sell a complete set? Maybe Stainless Steel?
). When tightening the screws on the radio tray I might have stripped those two out. Where do you guys buy screws at? I saw some on towerhobbies but I don't need 10 of them. Does anyone sell a complete set? Maybe Stainless Steel?
03-16-2011 | 07:47 AM
#4367
Suspended
Joined: Feb 2011
Posts: 197
03-16-2011 | 08:16 AM
#4368
I like the Gens Ace. But for me they havent been holding the voltage well. Ve had cells off from 3.28 to 3.37 and the case is coming apart at the seams. And you would swear Elton John designed it.
you can but I would question the ability to handle sustained voltage.
What I mentioned already.
looking good!!
Gens Ace is still a good pack for the money. Mine final balance fine. But the voltages between cells leaves a little to be desired. Also the resistance between the cells last time I checked was 2-1-0-0
Dude, that looks exactly like Arigatos buggy. How'd you do that!?
http://www.rctech.net/forum/7717033-post27.html
Ace Hardware
Grid mount the rest of us have. The outer bearing support only does unto 17T the inner is good to 22T.
looking good!!
Dude, that looks exactly like Arigatos buggy. How'd you do that!?
[/IMG] http://www.rctech.net/forum/7717033-post27.html
So I took out all my electronics last night for some light cleaning before my track day next weekend (actually all weekend since wife will be out of town!!). When tightening the screws on the radio tray I might have stripped those two out. Where do you guys buy screws at? I saw some on towerhobbies but I don't need 10 of them. Does anyone sell a complete set? Maybe Stainless Steel?
). When tightening the screws on the radio tray I might have stripped those two out. Where do you guys buy screws at? I saw some on towerhobbies but I don't need 10 of them. Does anyone sell a complete set? Maybe Stainless Steel?I know we had this discussion but I have some extra $$ to blow again on this buggy. I am already ordering the grid mount. What one do I get? I see there are two of them. I wanted the one with the support but I am running a 20-21 gear. I have all DE stuff. What other suggestions?
03-16-2011 | 08:20 AM
#4369
Tech Master
iTrader: (25)
Joined: Apr 2009
Posts: 1,775
From: Orlando / Maitland, FL
Oh i got my turnigy 5000mAh packs in ... they fit perfectly in the try with the foam, and fit perfectly under my punisher body...
I think these will become my pack of choice! i will report inital run time and voltage tonight or tomorrow
I think these will become my pack of choice! i will report inital run time and voltage tonight or tomorrow
03-16-2011 | 09:31 AM
#4374
Joined: Jan 2011
Posts: 2,030
From: Albany, NY
[QUOTE=GreggW;8811060] Dude, that looks exactly like Arigatos buggy. How'd you do that!?
http://www.rctech.net/forum/7717033-post27.html [QUOTE]
Haha, I really liked that paint too.. I wanted to do it but didn't want to copy.
I guess I'm not the only one. LOL
http://www.rctech.net/forum/7717033-post27.html [QUOTE]
Haha, I really liked that paint too.. I wanted to do it but didn't want to copy.
I guess I'm not the only one. LOL
03-16-2011 | 09:36 AM
#4375
Suspended
Joined: Feb 2011
Posts: 197
Bullet connectors
Anyone else running bullet connectors between the motor and ESC? I was thinking about adding some in.
Will everyone in here upload a pciture of their buggy with shell on and shell off? I would like to see what everyone elses looks like!
Will everyone in here upload a pciture of their buggy with shell on and shell off? I would like to see what everyone elses looks like!
03-16-2011 | 09:38 AM
#4376
Tech Fanatic
iTrader: (56)
Joined: Dec 2010
Posts: 900
From: Northern VA
Originally Posted by slash_me_up
I know we had this discussion but I have some extra $$ to blow again on this buggy. I am already ordering the grid mount. What one do I get? I see there are two of them. I wanted the one with the support but I am running a 20-21 gear. I have all DE stuff. What other suggestions?
Grid mount the rest of us have. The outer bearing support only does unto 17T the inner is good to 22T.
I know we had this discussion but I have some extra $$ to blow again on this buggy. I am already ordering the grid mount. What one do I get? I see there are two of them. I wanted the one with the support but I am running a 20-21 gear. I have all DE stuff. What other suggestions?
Grid mount the rest of us have. The outer bearing support only does unto 17T the inner is good to 22T.
N00b here as well, so I want to order the grid mount with the inner correct, so i have more options? I'm starting with the mamba max combo
03-16-2011 | 10:15 AM
#4378
Joined: Jan 2011
Posts: 2,030
From: Albany, NY
Go to www.GridRC.com and just do a bit of reading on the Mount for the RC8 and the difference between the inner and outer plates.
03-16-2011 | 10:27 AM
#4379
Tech Adept
Joined: Jan 2011
Posts: 166
From: Toronto, Canada
Mine are posted a page or two back.
j