Not at all. The 409, 407, and 210 all state that they can handle lipo. I have about 4 hours on my Eurus in 8th scale with unregulated Lipo with no problems. I am fully in love with my radio, and some of the guys i race with are in love with it too.

Cool, thx for the response. I plan on ordering the whole set-up.

I see you are not in the states. Shipping is going to kill you. Ampdraw had the best price on the Eurus; when I was in the market. You might want to buy local..


Pass you soon...

What is the "setting module" for?? When you buy the radio there is an option to buy with receiver and option to buy with receiver and setting module. Would i need the setting module for 1/8 scale off-raod nitro? Thanks

The setting module allows you to plug the setting card into the radio to program servos. I would say that you really don't need it.

Yep. I have never used my setting module.

I have the setting module, and likely will never use it. You still have to buy the card to adapt to either the ESC, or Servos which to me i will never buy, so it ends up being useless to me.

thx guys.

I think Ko Propo had an excess of setting modules. So to move them; they included them with the Eurus. They should have done it the same way as with the Japanese version. It came with the drop down adaptor not the setting module.


Pass you soon...

i thought of getting one.

some mentioned the new eurus still have problems like glitching all over and loss of signal.
many drivers encounter it in the worlds.

anyone here ?

I have had mine for 6 months and have not had one issue with it. By far, it is the best transmitter I have ever owned. I doubt there were problems at the world's 3. Tebo and 1. King both used the Eurus.

When using this case...................do you need to remove the back module of the Eurus ?

DT

I remove it because i dont want my radio resting on the antenna, but no you do not have to remove it. It has the perfect cutout for the module and your setting module if you have one.

+1...............Thank you for your feedback.

Great.

DT

OK I'm trying to sort out an issue with my radio KO ex 10/spektrum mod and rec. I noticed a few weeks ago at the track, some occasional what I'll call lagging, a slow responce to radio input, and loose its trim. This would happen maybe 2 times in a qualifier. I checked battery voltage, connections, antenna lead, and found nothing. The next 2 weekends the symptom gets worse, now it will randomally turn the steering servo about 1/2 way and return to normal position, as I was carrying the buggy to the pit wall, I saw it do this, and on the back straight, at full throttle, it turned straght into the haybales and into another buggy, I've rebinded, and no change. I just got a new spektrum mod and rec. fresh battery, bind, and as the buggy is sitting on the box, you can heard the throttle servo chatter, some call this the servo finding home position. I have 2 Hitec 7955tg's in the buggy, if you put your hand on the servo horn, you can feel the horn move very little, maybe 1 mm. I've change out throttle servo, and the same, even when the buggy is on the ground, you can hear the servo, I'm not sure where to go from here, anybody have any ideas?