Hi all,

I would like to know how to use the Xerun 1S... In 1S configuration.

For the moment, for make it work, I must disable the lipo protection, if not, the green led blink(under or over voltage indication).

Of course, for the first set, I use a 7.4V lipo.

Thanks.

What motor matches this speedo best thanks

speedpassion work great

Hegal - I apologize, work has gotten the best of me, I am home and will download the settings and post them shortly (for off-road).

may ii know if the software cn be use on just stock esc?

http://www.rctech.net/forum/8251169-post48.html

Hi, Just want to know what is the latest Firmware for HW120A?
Mine is for Software is
HW USB Link V1.62
Esc Hardware version HW427_V1.0
Esc SoftWare is V2.0_100528
2in 1 Program box Software is V1.06_100512
Hardware is HW310 V1.0

Is the the latest??Or is there most latest?

Nedd to know

Thnks

for anyone running off road- here is the set up I have been using lately with the 120a and 60a in a 2wd car and truck with a 13.5 HW motor

1- forward/brake
2-3.0 cutoff
3- 30% drag brake (i like alot)
4- DRRS - 7
5- brake force - 100%
6- reverse force- 25%
7- initial brake - 20%
8- neutral 6%
9- timing 22.5*
10- over hear enable
12- turbo - 6
13- RPM - 7500
14 delay .4
15- punch -4

humyu - 518 is the latest stock and 528 is the latest mod ESC software.

you can go to hobbywing.com in the download section and get the latest/greatest software for your ESC and programmer.

Thnks nikos2002

Thanks Nikkos,

Would you care to post your setup for your 8.5t 4wd buggy ?

No one can help me?

No the software cannot be used on the justock .justock is 100% zero timing and the cpu used in the justock wont allow the turbo software to be loaded.

but the 518 can be uploaded, am I right?

The only Speed controllers manufactured by HW for SP is the GT series thats all we have no link to the citrix series .From what i know only a few samples were made for SP with the citrix and thats about it .

So please any SP customers who need support we can only support the older style SP and the GT series thats all and the only reason why we will help with support is because we are hobbiests ourselves and we know how it feels not to have some sort of tech support .

thank you for your time .