Community
Wiki Posts
Search

8T 2.0

Thread Tools
 
Search this Thread
 
Old 10-19-2010 | 07:00 PM
  #9751  
builtb16a's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jun 2009
Posts: 295
From: Redlands, CA
Default

Originally Posted by losi_racer
my right rear outdrive got damaged because my rear diff just moved a tick back and fourth which caused my dog bone to pop out. not even 1/4 gallon of fuel thru it and bad mesh already caused issues.
good luck with that 4 hour enduro sluggo. be on the safe side.
builtb16a is offline  
Old 10-19-2010 | 07:03 PM
  #9752  
losi_racer's Avatar
Tech Champion
iTrader: (25)
 
Joined: Nov 2008
Posts: 6,470
From: mesa,az
Default

Originally Posted by builtb16a
good luck with that 4 hour enduro sluggo. be on the safe side.
who said i had a 4 hr enduro?
losi_racer is offline  
Old 10-19-2010 | 07:05 PM
  #9753  
builtb16a's Avatar
Tech Regular
iTrader: (1)
 
Joined: Jun 2009
Posts: 295
From: Redlands, CA
Default

Originally Posted by losi_racer
who said i had a 4 hr enduro?
sluggo_sx8 said on the last page... post #9746, he wanted to enter a 4 hour enduro with either a very worn, and shimmed r/p to the limits... and im just wishing him luck.
builtb16a is offline  
Old 10-19-2010 | 07:07 PM
  #9754  
rider313's Avatar
Tech Elite
iTrader: (94)
 
Joined: Sep 2009
Posts: 4,436
From: MN
Default

.
rider313 is offline  
Old 10-19-2010 | 07:08 PM
  #9755  
losi_racer's Avatar
Tech Champion
iTrader: (25)
 
Joined: Nov 2008
Posts: 6,470
From: mesa,az
Default

Originally Posted by builtb16a
sluggo_sx8 said on the last page... post #9746, he wanted to enter a 4 hour enduro with either a very worn, and shimmed r/p to the limits... and im just wishing him luck.
O so you were quoted me to show him how fast it fails. gotcha
losi_racer is offline  
Old 10-20-2010 | 03:38 PM
  #9756  
juggaloracer198's Avatar
Tech Adept
 
Joined: Oct 2010
Posts: 144
From: HEMET COMPITITION RACEWAY,ca
Thumbs up

three words............GO-ENGINE-USA!!!!!!!!!!!!!!!!!!!!!!!
juggaloracer198 is offline  
Old 10-20-2010 | 04:45 PM
  #9757  
sluggo_sx8's Avatar
Tech Addict
iTrader: (5)
 
Joined: Apr 2009
Posts: 614
From: Canada
Default

Thanks man! I think it will turn out ok, I am going to check it again before the race to make sure it is going to make it. If not I will replace before the race. We are also bringing a second truggy broke down into modules for quick replacement (complete rear end,front end and radio tray with servos) We also have a back up motor already setup with clutch ready to go.

There is alot to do to get ready for a 4 hour race, just making the race order for 4 guys can be alot of work. All 4 guys have to race,pit,marshal and floater in 1/2 hour turns. Also we are looking at 12deg c and posible rain

Also spare tires, batteries and a couple gallons of fuel, should be a blast though I can't wait!
sluggo_sx8 is offline  
Old 10-20-2010 | 06:56 PM
  #9758  
dnebout's Avatar
Tech Master
iTrader: (32)
 
Joined: Oct 2009
Posts: 1,098
From: NorCal
Default

Anybody try these Savox servos? They post some pretty impressive specs on torque and speed. Anybody know what the warranty is?

http://www.rcplanet.com/Savox_Digita...avsc1267mg.htm
dnebout is offline  
Old 10-20-2010 | 07:46 PM
  #9759  
bigjayjay1's Avatar
Tech Champion
iTrader: (87)
 
Joined: Jul 2009
Posts: 5,614
Default

Originally Posted by dnebout
Anybody try these Savox servos? They post some pretty impressive specs on torque and speed. Anybody know what the warranty is?

http://www.rcplanet.com/Savox_Digita...avsc1267mg.htm
people been having great results haven't heard anything bad not sure about the service thou spending a few extra for hitec or watching the for sale thread for almost new is another option.
bigjayjay1 is offline  
Old 10-20-2010 | 09:00 PM
  #9760  
Frank L's Avatar
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Originally Posted by dnebout
Anybody try these Savox servos? They post some pretty impressive specs on torque and speed. Anybody know what the warranty is?

http://www.rcplanet.com/Savox_Digita...avsc1267mg.htm

I have read good things about the Savox servos. Ihavent tried them my hitecs have been going strong. I do like the new stuff from ko check these out.

http://www.amainhobbies.com/product_...oly-Compatible

http://www.amainhobbies.com/product_...oly-Compatible
Frank L is offline  
Old 10-20-2010 | 09:02 PM
  #9761  
losi_racer's Avatar
Tech Champion
iTrader: (25)
 
Joined: Nov 2008
Posts: 6,470
From: mesa,az
Default

Originally Posted by Frank L
I have read good things about the Savox servos. Ihavent tried them my hitecs have been going strong. I do like the new stuff from ko check these out.

http://www.amainhobbies.com/product_...oly-Compatible

http://www.amainhobbies.com/product_...oly-Compatible
those look sick, the specs are nice. the price just makes me sick also ha ha
losi_racer is offline  
Old 10-20-2010 | 09:06 PM
  #9762  
Frank L's Avatar
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Originally Posted by losi_racer
those look sick, the specs are nice. the price just makes me sick also ha ha
They make a cheaper version that's 169.99 same specs but no full alum case. Pricy ya but you get what you pay for usually except for those damm Jr hv's. I'm still a little bitter over 4 of those puppies.
Frank L is offline  
Old 10-20-2010 | 09:22 PM
  #9763  
Integra's Avatar
Tech Lord
iTrader: (8)
 
Joined: Dec 2006
Posts: 12,489
Default

Lol get what you pay for........... Too Funny.




Sorry frank you know its funny *hit
Integra is offline  
Old 10-20-2010 | 09:22 PM
  #9764  
pyromania's Avatar
Tech Master
iTrader: (18)
 
Joined: Feb 2009
Posts: 1,283
From: North Hills, CA
Default

Originally Posted by Frank L
They make a cheaper version that's 169.99 same specs but no full alum case. Pricy ya but you get what you pay for usually except for those damm Jr hv's. I'm still a little bitter over 4 of those puppies.
Yup, right now I have 2 of them as paper weights. JR dose not want to warranty them.
pyromania is offline  
Old 10-20-2010 | 09:27 PM
  #9765  
dnebout's Avatar
Tech Master
iTrader: (32)
 
Joined: Oct 2009
Posts: 1,098
From: NorCal
Default

OOOHHH Daddy! $$$$
I especially like the "special Japanese Aluminum" Must be something that's just been invented.
Pretty cool looking though! I wonder what the warranty is. Any idea?
dnebout is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.