3LikesTamiya TRF415
hehehe.....
]
02-29-2004 | 03:49 PM
#949
Tech Fanatic
iTrader: (1)
Joined: Nov 2001
Posts: 997
From: Somewhere on earth
I have 2 415's hear with loads of spares for them, got them while i was out in Tokyo and boy are they nice. Got all the blue piviot holders spare, ti screw sets from square and a hole load of other parts 
Rick
Rick
02-29-2004 | 03:50 PM
#950
Tech Champion
Joined: Sep 2001
Posts: 6,074
From: Out to lunch
Originally posted by Rick Draper
I have 2 415's hear with loads of spares for them, got them while i was out in Tokyo and boy are they nice. Got all the blue piviot holders spare, ti screw sets from square and a hole load of other parts Rick
I have 2 415's hear with loads of spares for them, got them while i was out in Tokyo and boy are they nice. Got all the blue piviot holders spare, ti screw sets from square and a hole load of other parts
Rick
does the standard kit come with all available pivot blocks?
02-29-2004 | 04:05 PM
#951
Tech Fanatic
iTrader: (1)
Joined: Nov 2001
Posts: 997
From: Somewhere on earth
Yes it comes with all the piviot blocks and all the roll bars. Also now you adjust rear toe on the front rear block not the rear rear block as before, the blocks are 1mm lower than the evo 3 ones but you run the front ones flat to the chassis and the rears 2mm higher i think. Also Square do ti screw sets very cheap . Also on the front you use 2 D blocks so the track width only requires 0.5mm of spacers per side. Rick
. Also on the front you use 2 D blocks so the track width only requires 0.5mm of spacers per side. Rick
02-29-2004 | 04:40 PM
#953
Tech Champion
Joined: Sep 2001
Posts: 6,074
From: Out to lunch
Originally posted by Rick Draper
Yes it comes with all the piviot blocks and all the roll bars. Also now you adjust rear toe on the front rear block not the rear rear block as before, the blocks are 1mm lower than the evo 3 ones but you run the front ones flat to the chassis and the rears 2mm higher i think. Also Square do ti screw sets very cheap . Also on the front you use 2 D blocks so the track width only requires 0.5mm of spacers per side. Rick
Yes it comes with all the piviot blocks and all the roll bars. Also now you adjust rear toe on the front rear block not the rear rear block as before, the blocks are 1mm lower than the evo 3 ones but you run the front ones flat to the chassis and the rears 2mm higher i think. Also Square do ti screw sets very cheap
. Also on the front you use 2 D blocks so the track width only requires 0.5mm of spacers per side. Rick
02-29-2004 | 07:18 PM
#954
Originally posted by SpeedTech
....dude...that was so quick it was almost scary...lol Thank you eeyan, you're one of the first
Steve Wang
....dude...that was so quick it was almost scary...lol Thank you eeyan, you're one of the first
Steve Wang
02-29-2004 | 09:15 PM
#958
Originally posted by Hebiki
eeyan is one of the first? am i the first steve??? please say i am! probably one of the few times ill be first and eeyan will be second!
eeyan is one of the first? am i the first steve??? please say i am! probably one of the few times ill be first and eeyan will be second!
02-29-2004 | 09:24 PM
#959
im very very happy with the results today. i was very surprised that i held the difference was only .04
that in itself was more than good enough for me. i could have retied today and i would have considered my RC career a great success.
415!!! 415!!!
that in itself was more than good enough for me. i could have retied today and i would have considered my RC career a great success.
415!!! 415!!!
