I really like the RE10. When i put JS on buggy i use the 9886. Both pipes work great. Hopefully the weather will cooperate so i can get it to stretch it's legs at Hobby Hut this Sunday.

yea cant wait rob hopefully the weather cooperates

I saw someone post that the OD plug is too hot and if you go too far on the needles it may detonate, yet when I looked the plugs up on Amain the P4 is listed as "super hot" and the OD 97 is a medium ???

Well its almost time to race again and after a few weeks of running this engine I feel like it is a really nice mill and has plenty of power. As I stated earlier this week the guys around here are all running different pipes and the end results are the same it performs well. I have been running p3 but I got some p4s on the way and that is what I am going to go with in the race prep as recomended. Thanks again to E.B. Mods and Lucky7.

Wow!!!! What a week of racing. I'm mentally and physically spent.. I made it to Hot Rod Hobbies in So Cal for the Tues night nats. The guys from RC Car Mag were there to help me tune my engine and work the bugs out of my truggy. Back in Las Vegas for Silver State where I ended up bumping my way into the truggy A main after qualifying in the C main. Whaaaaaaaaaat I made the A MAIN.............I still can't believe it

Thank you to all my family and friends that made this possible. The best part of the trip was coming home to my girls

My race prep JS engine started and ran flawlessly all week. Great power and fuel economy. Everyone who helped me over the week was very impressed with how well this engine was working in my truggy. I talked with a couple other JS owners and they all have had the same results. Great job with the engine. I can't wait to race it again!!!!!!

Wow. Impressive show with the motor. Congrats

On the 086 pipe, do you use the standard 086 or the 086 high speed?

I'm using the 086HS. It works great

http://www.amainhobbies.com/product_...ystem-Polished

Thank you.

well last race of indoor season last night and had a great day with my full modded in truggy and race prep in buggy.....motors are great especially with eb mods fuel.....thnx again guys

The Team ran this weekend in SoCal. Temp. was 80 degrees. In the Mods we ran P6 plugs and P5s in the stock/race preps.

The engines ran better with the colder plugs and warm temps. Buggies and trucks pitted at 10 minutes.

Please try these plugs as we get into summer.

+1

How does this mill work with the AE 2035 or 2039?

the AE pipes work ok, but to get the best performance go with a 86.

I can't wait to get my motors. Hurry up UPS man and get here. LOL
Looking forward to getting them on the track next weekend.

Stephen