Tekin RX8 1/8 Scale Brushless ESC Thread
#946
Tech Fanatic
iTrader: (10)
For those that are asking here are my personal RX8 setups. You can also see the new RX8 interface. If you plug in your RX8 into the Hotwire and don't see this you need to contact me to get the current software(197).
Also, the gearing on the two is:
RX8 1900 is geared 16/46
RX8 2050 is geared 15/46
You really can't go wrong with 13-16 on the 1900 or 2050 on 4s!
Also, the gearing on the two is:
RX8 1900 is geared 16/46
RX8 2050 is geared 15/46
You really can't go wrong with 13-16 on the 1900 or 2050 on 4s!
I dont see settings for throttle curves or settings to add a custom LVC.
Those are included right?
#947
They are there, Throttle Profile is the curve adjustment, user customs aren't available quite yet. I'm assuming LVC is low voltage cutoff? It's right next the Throttle Profile.
#948
Ok, just to clarify some gearing. Those were based off a Mugen Mbx5r and Losi 2.0 Buggy. Looking at the others we may start talking FDR on 1/8 buggies and truggies soon! LOL:
From the look of it FDR's from 9.5 to 10.5 give or take are going to be exceptable.
For those who don't know FDR: Spur/pinion x internal radio = FDR
So yes in a D8 or RC8 you're going to land around the 17-19 mark on 4s!
From the look of it FDR's from 9.5 to 10.5 give or take are going to be exceptable.
For those who don't know FDR: Spur/pinion x internal radio = FDR
So yes in a D8 or RC8 you're going to land around the 17-19 mark on 4s!
#949
Team Tekin
iTrader: (18)
Ok, just to clarify some gearing. Those were based off a Mugen Mbx5r and Losi 2.0 Buggy. Looking at the others we may start talking FDR on 1/8 buggies and truggies soon! LOL:
From the look of it FDR's from 9.5 to 10.5 give or take are going to be exceptable.
For those who don't know FDR: Spur/pinion x internal radio = FDR
So yes in a D8 or RC8 you're going to land around the 17-19 mark on 4s!
From the look of it FDR's from 9.5 to 10.5 give or take are going to be exceptable.
For those who don't know FDR: Spur/pinion x internal radio = FDR
So yes in a D8 or RC8 you're going to land around the 17-19 mark on 4s!
#950
Yes if the internal drive ratio is 4.3. I was looking that up right now!
#951
Tech Fanatic
iTrader: (10)
Ill probably figure this out when I get it, but just by looking at randy's screen shot, "4" doesnt mean much to me in terms of voltage.
Maybe "4" for 4s, but I was looking to alter the voltage exactly and directly. Lots of people run custom cutoffs for like 30% capacity which to me means about 20.8V on a 6s Battery. Is there a way to set that? Castle link has it...
#952
Ill probably figure this out when I get it, but just by looking at randy's screen shot, "4" doesnt mean much to me in terms of voltage.
Maybe "4" for 4s, but I was looking to alter the voltage exactly and directly. Lots of people run custom cutoffs for like 30% capacity which to me means about 20.8V on a 6s Battery. Is there a way to set that? Castle link has it...
Maybe "4" for 4s, but I was looking to alter the voltage exactly and directly. Lots of people run custom cutoffs for like 30% capacity which to me means about 20.8V on a 6s Battery. Is there a way to set that? Castle link has it...
#954
We need custom LVC that CAN be set to at least 20V (21V would be better).
#955
So what would you guys like to see for the LVC? At least 21V?
#956
I answered before you asked.
#959
Any word on when these will ship?
#960