Go-Tech Engines Thread
#5371
please send me an email at [email protected] we are replacing the long needles on any engine purchased within the U.S.
e-mail sent.
#5372
Losi 2.0 with a RB Mods Go 5pt, running a ths 816 pipe losi 4shoe all aluminum shoes 2 gold 2 green. I absolutely LOVE this set up!! 5-5-2 in the diffs, very controllable!
David
David
#5373
Joined: Sep 2008
Posts: 2,767
From: Pleasant View TN
for the guys that use the go .21 5 port in a buggy, what springs are you guys using.to tame the bottom,i already bought the 086 pipe,to help it, should i use 1.0 or .9 springs.iam going to put it on a cen matrix fre with 5,5,2 in the diff.should i get a smaller restrictor.iam on a budget and i dont want to spend money experimenting when i could try a set up that works with you guys.i bought this engine used before i realized this was better for a truggy.but i got a good deal so i want to make it work. thanks
a go 5pt w/086 in a buggy rocks!!!!!!!
#5374
Guys I recently got a 3port race with about a gallon through it and was in storage for about 6 months. Prior to storage after run oil was applied but the engine was not cleaned out.
When I ran it on my buggy (Hyper 7), it fired up and idled ok but would sputter and die if I gave it gas. I took the engine apart and gave it a thorough clean and lube before putting it back together, unfortunately that did not solve the problem. Changing to an OS carb (from an old VSPEC not the J type carb with the red OS restrictor) helped some but it would only run decently after running it down our local track's straight 4x WOT with it sputtering away. Sputter goes away midtrack on the 4th run. It would run smoothly after that but once it cools down I have to do the same thing again.
The fuel and air filter systems are ok. Am not sure about the type of GO carb installed but it looks like the one with the long LSN. Any suggestions would be greatly appreciated.
Cheers
When I ran it on my buggy (Hyper 7), it fired up and idled ok but would sputter and die if I gave it gas. I took the engine apart and gave it a thorough clean and lube before putting it back together, unfortunately that did not solve the problem. Changing to an OS carb (from an old VSPEC not the J type carb with the red OS restrictor) helped some but it would only run decently after running it down our local track's straight 4x WOT with it sputtering away. Sputter goes away midtrack on the 4th run. It would run smoothly after that but once it cools down I have to do the same thing again.
The fuel and air filter systems are ok. Am not sure about the type of GO carb installed but it looks like the one with the long LSN. Any suggestions would be greatly appreciated.
Cheers
#5379
They are still working on a turbo button for the .25. I think it has enough power anyway but I would run a turbo button if it was available.
The grinding I was talking about was on the Go carb not the Os. sorry. I've never seen anyone run a short lsn on an Os.
Rex
The grinding I was talking about was on the Go carb not the Os. sorry. I've never seen anyone run a short lsn on an Os.
Rex
#5380
Guys I recently got a 3port race with about a gallon through it and was in storage for about 6 months. Prior to storage after run oil was applied but the engine was not cleaned out.
When I ran it on my buggy (Hyper 7), it fired up and idled ok but would sputter and die if I gave it gas. I took the engine apart and gave it a thorough clean and lube before putting it back together, unfortunately that did not solve the problem. Changing to an OS carb (from an old VSPEC not the J type carb with the red OS restrictor) helped some but it would only run decently after running it down our local track's straight 4x WOT with it sputtering away. Sputter goes away midtrack on the 4th run. It would run smoothly after that but once it cools down I have to do the same thing again.
The fuel and air filter systems are ok. Am not sure about the type of GO carb installed but it looks like the one with the long LSN. Any suggestions would be greatly appreciated.
Cheers
When I ran it on my buggy (Hyper 7), it fired up and idled ok but would sputter and die if I gave it gas. I took the engine apart and gave it a thorough clean and lube before putting it back together, unfortunately that did not solve the problem. Changing to an OS carb (from an old VSPEC not the J type carb with the red OS restrictor) helped some but it would only run decently after running it down our local track's straight 4x WOT with it sputtering away. Sputter goes away midtrack on the 4th run. It would run smoothly after that but once it cools down I have to do the same thing again.
The fuel and air filter systems are ok. Am not sure about the type of GO carb installed but it looks like the one with the long LSN. Any suggestions would be greatly appreciated.
Cheers
#5381
Okay, So I tried searching this thread but I'm still confused.
I want to pick up a Go 3 port sport. Am I right that you can buy a turbo head button thing and make the motor more powerful?
Where would I get that, and how do you install it? Is it simple?
I basically want a really low price engine to practice my driving, I have an RC8. Getting a 3 port sport with turbo button sounds like the ceapest way.
I want to pick up a Go 3 port sport. Am I right that you can buy a turbo head button thing and make the motor more powerful?
Where would I get that, and how do you install it? Is it simple?
I basically want a really low price engine to practice my driving, I have an RC8. Getting a 3 port sport with turbo button sounds like the ceapest way.
#5382
Joined: Sep 2008
Posts: 2,767
From: Pleasant View TN
Okay, So I tried searching this thread but I'm still confused.
I want to pick up a Go 3 port sport. Am I right that you can buy a turbo head button thing and make the motor more powerful?
Where would I get that, and how do you install it? Is it simple?
I basically want a really low price engine to practice my driving, I have an RC8. Getting a 3 port sport with turbo button sounds like the ceapest way.
I want to pick up a Go 3 port sport. Am I right that you can buy a turbo head button thing and make the motor more powerful?
Where would I get that, and how do you install it? Is it simple?
I basically want a really low price engine to practice my driving, I have an RC8. Getting a 3 port sport with turbo button sounds like the ceapest way.
#5384

ps I think the turbo head button is about 15 bucks...you only need the button not an entire head..assuming the sport version uses a separate head button that is..I've never looked ...some manufacturers use all in one cooling head/button assemblies on lower price models..



2Likes