18LikesXray NT1
12-27-2007 | 11:20 AM
#2282
Tech Fanatic
Joined: Sep 2006
Posts: 887
From: NY, New York
12-28-2007 | 12:45 AM
#2283
Tech Regular
Joined: Mar 2005
Posts: 478
From: Veenendaal, The Netherlands
12-28-2007 | 01:14 AM
#2284
Transponder holder
..
12-28-2007 | 09:59 AM
#2287
i'm using a small lipo so i have the transponder below the tank, it's as low as possible and centered, and it's really close to the reciever so i could cut of a lot of wire which saves weight.
12-28-2007 | 10:02 AM
#2288
advfuel, i see you use the KO 2413 low profile servo.
Did you ever had problems with it, mine was broken in 2 months and i want to find out if it was just a bad servo or it's just made too small and electronics aren't up to spec to use in nitro.
Did you ever had problems with it, mine was broken in 2 months and i want to find out if it was just a bad servo or it's just made too small and electronics aren't up to spec to use in nitro.
12-28-2007 | 04:18 PM
#2289
Servo
They have taken a fair beating as our track is marked out with 50mm polly tube.If the end point adjustment and servo saver is not to loose or tight all should be well. I would recommend the servo for throttle & steering.
Now I have written this,they will probably fail now
12-28-2007 | 06:33 PM
#2290
Tech Master
Joined: May 2007
Posts: 1,021
gidday
can anyone advice me how to get traction to the rear as after 20 minutes i have gone from 62.5 mm 40 shore foam rear tyres to 100 shore hard plastic and other guys still have plenty of tyre left, i have been told than my cars is consantly spinning out of the corners,, it did seem slow out of the corners but i throught it was my clutch running 100k frount diff oil 60 rear with pink springs 33lb please help grub
can anyone advice me how to get traction to the rear as after 20 minutes i have gone from 62.5 mm 40 shore foam rear tyres to 100 shore hard plastic and other guys still have plenty of tyre left, i have been told than my cars is consantly spinning out of the corners,, it did seem slow out of the corners but i throught it was my clutch running 100k frount diff oil 60 rear with pink springs 33lb please help grub
12-28-2007 | 06:33 PM
#2291
Tech Master
Joined: May 2007
Posts: 1,021
gidday
can anyone advice me how to get traction to the rear as after 20 minutes i have gone from 62.5 mm 40 shore foam rear tyres to 100 shore hard plastic and other guys still have plenty of tyre left, i have been told than my cars is consantly spinning out of the corners,, it did seem slow out of the corners but i throught it was my clutch running 100k frount diff oil 60 rear with pink springs 33lb please help grub
can anyone advice me how to get traction to the rear as after 20 minutes i have gone from 62.5 mm 40 shore foam rear tyres to 100 shore hard plastic and other guys still have plenty of tyre left, i have been told than my cars is consantly spinning out of the corners,, it did seem slow out of the corners but i throught it was my clutch running 100k frount diff oil 60 rear with pink springs 33lb please help grub
