JL Racing .12
#211
Tech Addict
iTrader: (4)
Joined: Oct 2002
Posts: 711
From: Staten Island ny
Hey guys, I just picked up the red dot through my lhs. I am a bit concerned though. It appears the sleeve does not sink even with the top part of the engine.It appears at least 1/2 of the rim of the sleeve sticks out and you can see it between the top of the engine and the head. Is this normal for the engine? I do not want to try and force it down. Thanks for your help
#212
Ive seen some motors do this. Its apparently normal. I dont like it though , but just as long as dirt and such doesnt get down around the sleeve thats when I dont like it.
Also what temps are these motors pulling when tuned. Just so I got an idea?
Also what temps are these motors pulling when tuned. Just so I got an idea?
#213
Originally Posted by CHUCKMANDO
Hey guys, I just picked up the red dot through my lhs. I am a bit concerned though. It appears the sleeve does not sink even with the top part of the engine.It appears at least 1/2 of the rim of the sleeve sticks out and you can see it between the top of the engine and the head. Is this normal for the engine? I do not want to try and force it down. Thanks for your help
#214
Tech Addict
iTrader: (4)
Joined: Oct 2002
Posts: 711
From: Staten Island ny
Originally Posted by C Verano
It is normal for the sleeve to be above the engine case.
#215
Originally Posted by CHUCKMANDO
Ok great, Thanks Has anyone tried the rdlogics turbo II with the engine yet? Will the standard nova rossi plugs or os plugs work with this engine.
#217
Tech Addict
iTrader: (4)
Joined: Oct 2002
Posts: 711
From: Staten Island ny
Originally Posted by Team Kamikaze
Only PICCO plugs.
#220
Originally Posted by quietstorm76
It will run but it will tune erratic. In my experience it would go rich to lean then rich again.
#222
Tech Apprentice
Joined: Apr 2007
Posts: 67
I need help deciding between the jlr red dot and a os tz 5 port. If pipes, fuel, and setup etc....are all equal, how do these engines stack up against each other on acceleration and top speed. I can get either of these brand new for 170, just having trouble deciding which. I know the tz 5 port is outlaw, but the only track I run club races at allows anything that is .12. There are a few tz 3 and 5 ports at my track, along with some sirio's and novarossi. I would like to be the only one with the jlr red-dot at my track. What do you all think?
#223
Sometimes it's good to be different. The results so far proves the JLR is not only an awesome motor, but it's priced a lot less than the other motors that are overpriced. Kudos to Picco for making a big comeback!
I have two motors myself, but there is always room for more.
I have two motors myself, but there is always room for more.
#224
Originally Posted by CHUCKMANDO
Hey guys, I just picked up the red dot through my lhs. I am a bit concerned though. It appears the sleeve does not sink even with the top part of the engine.It appears at least 1/2 of the rim of the sleeve sticks out and you can see it between the top of the engine and the head. Is this normal for the engine? I do not want to try and force it down. Thanks for your help
Hey chuck, you think you're gonna make it down to Floyd this sun for warm ups? I think I'll be going there myself.
#225
Tech Addict
iTrader: (4)
Joined: Oct 2002
Posts: 711
From: Staten Island ny
Originally Posted by HarKonnenD
Hey chuck, you think you're gonna make it down to Floyd this sun for warm ups? I think I'll be going there myself.



1Likes