OS 12 TzR
#1156
newbie question
hi guys ... i m thinking of getting the new max 12tz engine... i wwas wondering where about can i get the clutches for this engine... will my old clutches on the hyper7 fit in it?? other than a tune pipe, engine , glow plug wat else is needed for a new engine to run....
srry bout the newbie question...
cheers
srry bout the newbie question...
cheers
#1157
Tech Elite
iTrader: (34)
Originally Posted by spdz
hi guys ... i m thinking of getting the new max 12tz engine... i wwas wondering where about can i get the clutches for this engine... will my old clutches on the hyper7 fit in it?? other than a tune pipe, engine , glow plug wat else is needed for a new engine to run....
srry bout the newbie question...
cheers
srry bout the newbie question...
cheers
#1158
Tech Master
iTrader: (2)
Originally Posted by performula
Especially if you are at the track and he is there. He spent about 20 minutes on my car and loaned me proper tires (trued). Very nice man.
(And I don't have his engine)
(And I don't have his engine)
#1159
Originally Posted by Riketsu
What type of clutch does your hyper7 use? Is it a powerclutch or the conventional shoe-clutch. This is very important because it determines which type of the OS TZ you have to buy. Theres different crankshaft for different clutches.
tthnx a bunch ...
#1160
need os speed
two tzs and I'd like a third
where can I purchase on line the tz os speed
futaba pro shop sold out those
any other on line store willing to ship to the us?
thanks
where can I purchase on line the tz os speed
futaba pro shop sold out those
any other on line store willing to ship to the us?
thanks
#1161
Tech Master
iTrader: (17)
Originally Posted by Seisick
two tzs and I'd like a third
where can I purchase on line the tz os speed
futaba pro shop sold out those
any other on line store willing to ship to the us?
thanks
where can I purchase on line the tz os speed
futaba pro shop sold out those
any other on line store willing to ship to the us?
thanks
Try www.rc-champ.co.jp
They had them in stock last week, 305.00 shipped to the U.S.
Email them what you want, where your from(for shipping quote), and they will get back to you asap with availability and pricing.
Hope this helps.
#1162
#1163
Tech Elite
iTrader: (34)
Originally Posted by spdz
probably try www.rcmart.com
they selling us$189++ for the .12tz-t3
they selling us$189++ for the .12tz-t3
#1164
Hey guys,
The carb retaining nut vibrated out off of my TZ, does anyone know what size it is so i can try an pick one up tomorrow?
The carb retaining nut vibrated out off of my TZ, does anyone know what size it is so i can try an pick one up tomorrow?
#1165
Tech Elite
iTrader: (34)
Originally Posted by Dynamite
Hey guys,
The carb retaining nut vibrated out off of my TZ, does anyone know what size it is so i can try an pick one up tomorrow?
The carb retaining nut vibrated out off of my TZ, does anyone know what size it is so i can try an pick one up tomorrow?
http://www2.towerhobbies.com/cgi-bin...?&I=LXCE50&P=Z
#1166
Tech Addict
Thread Starter
Hello from France,
inside pics of the Speed...
http://www.rcdriver-online.com/index...article=369708
inside pics of the Speed...
http://www.rcdriver-online.com/index...article=369708
#1167
Tech Elite
iTrader: (34)
Originally Posted by romuald31
Hello from France,
inside pics of the Speed...
http://www.rcdriver-online.com/index...article=369708
inside pics of the Speed...
http://www.rcdriver-online.com/index...article=369708
#1168
Tech Elite
iTrader: (4)
running temp?
Run quite a few pages and got differnt opinions on operating temp.
Some say it runs great at 190-210. Some say it runs hot 240/250.
Just ran mine for the first time this past Sat. Couldn't get any power out if I run at 210. I would come in after warm up at 230, 15 mins Main later at 240/245. Plenty of smoke though.
So, hate to bring up an old horse, but what's everyone temp? I was in the 80 degree air temp on Sat. Another local TZ driver ran his at around 200, never over 210.
Dom
Some say it runs great at 190-210. Some say it runs hot 240/250.
Just ran mine for the first time this past Sat. Couldn't get any power out if I run at 210. I would come in after warm up at 230, 15 mins Main later at 240/245. Plenty of smoke though.
So, hate to bring up an old horse, but what's everyone temp? I was in the 80 degree air temp on Sat. Another local TZ driver ran his at around 200, never over 210.
Dom
#1169
Tech Addict
Thread Starter
Hello from France,
OS manufacture two .12 Tz:
- the stock .12 Tz
- the Speed Tuned .12 Tz
Like others ( JP: FX03 stock and FX03 Black engine - RB : V12 and V12 Rody )
The price here in France is around 375€.
About the running temperature:
with an outside T° around 70° F, the engine T° is around 210°F and maximum 240°F ( EFRA Rules : 16% nitro - Sedan bodies )
OS manufacture two .12 Tz:
- the stock .12 Tz
- the Speed Tuned .12 Tz
Like others ( JP: FX03 stock and FX03 Black engine - RB : V12 and V12 Rody )
The price here in France is around 375€.
About the running temperature:
with an outside T° around 70° F, the engine T° is around 210°F and maximum 240°F ( EFRA Rules : 16% nitro - Sedan bodies )
#1170
the temp is only a guideline.
not definitive.
some pple use a $30 temp probe, some use rayteks, some use exergens. i would expect the temp reading to differ from one to the other
some point the temp gauge on the fin, some point on the case, some point on the glowplug.
the best is to tune ur engine by sight and sound. if u see a good trail of smoke and your engine does not sound lean, then why worry how much the temp is?
i only use the temp gauge when i want to measure RELATIVE temperature - ie if my engine is running at 110C and i tune it, then i can use the temp gauge to quantify how much a difference the tuning made, ie +5c or +10C, etc ..
not definitive.
some pple use a $30 temp probe, some use rayteks, some use exergens. i would expect the temp reading to differ from one to the other
some point the temp gauge on the fin, some point on the case, some point on the glowplug.
the best is to tune ur engine by sight and sound. if u see a good trail of smoke and your engine does not sound lean, then why worry how much the temp is?
i only use the temp gauge when i want to measure RELATIVE temperature - ie if my engine is running at 110C and i tune it, then i can use the temp gauge to quantify how much a difference the tuning made, ie +5c or +10C, etc ..