hi guys, just a question: what kind of thread locker do you use on this car?
I have a issue with the chassis and the front upper deck screws...i use blue loctite thread locker but the screws always pop off almost on every run. Maybe i'm doing something wrong? It never happened to lose all this screws on a single practice day than with this car...

I don't use much if any but always Loctite 243, it's the blue one.

I don't use any other brand when needed on anything.

has anyone successfully mounted a .21 on the NT1. and if so what did you do?

Thanks

I haven't done it on the NT1 but I have on other 1/10 cars here is what you need:
1. Enough room. Make sure your 21 will fit in the space first and not interfere with surrounding components
2. Adjustable engine mounts. This is a must since the mounting holes are wider apart on the .21 engine
3. Flywheel position Make sure the flywheel is centered on the opening in the chassis. Worse case you have to widen the opening.
I'm assuming you want to do this for drag racing, any other reason would not be worth the effort in my opinion. It would be too
overpowered for racing on a normal track. If you cant find a 21 to fit try a .15. When all else fails - search YouTube.

Hope this helps

Looking for a '15 chassis and possible parts hoard...

I know this channel is not a market or trade topic but I am looking for a NT1 monoblock engine block if anyone has one please reach out to me. Thanks

Are parts interchangeable with newer models on the 2016 NT1?

It's 2019 and I'm still rocking a 2007. This car has character.

If anyone is looking to get started in Nitro Sedan, I am selling a truck load of my NT1 stuff here: XRAY NT1 Nitro Mega Package - Tons of Stuff

Time to go 1/8 racing ;-)

I love my xray cars. I just got a 2019 NT1.2 and I am looking forward in running it. I had bought a couple other 10 scale cars and I regret it

New NT1 '19 seems to be getting on well at the ENS.

Does anyone have any Aluminum Pulleys. I am looking for the 20T 2 Speed Center and the 19T center pulley.

PM Sent