4Likes"the break in bible"
04-17-2018 | 03:06 AM
#271
Tech Adept
Joined: Aug 2017
Posts: 210
From: Bussum, The Netherlands
To be honest, there are 1001 methodes how to break in an engine and all are basically the same: start rich, keep te performance down and work slowly over 1 or 2 liter (depending the starting pinch) to a race tuning. With cheap engines I have done plenty of the quick and dirty way and have broken in several engines within an half liter and the results were also good.
Now for me, I have made 2 break in machines so I do de most work at home.....
Now for me, I have made 2 break in machines so I do de most work at home.....
04-17-2018 | 04:00 AM
#272
Tech Lord
Joined: Aug 2007
Posts: 14,044
From: Holland
Do not get fooled by different results mentioned by others. All engines do come with small tolerances so that one is faster than the other or keeping its pinch better are most of the time caused by tolerances and choice of materials.
04-18-2018 | 02:22 PM
#274
Tech Adept
Joined: Aug 2017
Posts: 210
From: Bussum, The Netherlands
Ok...thx ...will give the method described in the first post a go, cooling down in between 2 to 3 minutes stints and trying to keep the temps up, not too rich, not too lean, not reving up to high
w.
w.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
