Serpent 811 Cobra Buggy 2.1
#2431
Last edited by Palebushman; 02-06-2018 at 05:01 AM.
#2432
So I bought a Cobra RTR and ended up buying a new 811 2.1 with upgrades to 2.2
I love it. I used to race on road Impulse, 700, 710 etc. New to offroad.
Question, can we use the SRX8 radio tray? Of course changing the center diff carriers as the brakes are different.
That POS trackstar engine is getting swapped with a Novarossi Paloma. Just trying the car, so easy to work with except the servos and radio. I hope to be able to use the SRX8 radio tray
I love it. I used to race on road Impulse, 700, 710 etc. New to offroad.
Question, can we use the SRX8 radio tray? Of course changing the center diff carriers as the brakes are different.
That POS trackstar engine is getting swapped with a Novarossi Paloma. Just trying the car, so easy to work with except the servos and radio. I hope to be able to use the SRX8 radio tray
#2433
So I bought a Cobra RTR and ended up buying a new 811 2.1 with upgrades to 2.2
I love it. I used to race on road Impulse, 700, 710 etc. New to offroad.
Question, can we use the SRX8 radio tray? Of course changing the center diff carriers as the brakes are different.
That POS trackstar engine is getting swapped with a Novarossi Paloma. Just trying the car, so easy to work with except the servos and radio. I hope to be able to use the SRX8 radio tray
I love it. I used to race on road Impulse, 700, 710 etc. New to offroad.
Question, can we use the SRX8 radio tray? Of course changing the center diff carriers as the brakes are different.
That POS trackstar engine is getting swapped with a Novarossi Paloma. Just trying the car, so easy to work with except the servos and radio. I hope to be able to use the SRX8 radio tray
That being said I had no issues with the stock 811 radio tray all the time I ran 811 and I still run it in 811 GT and Truggy. Personally I actually prefer the 811 tray over the SRX8 tray! It certainly looks nicer...
#2434
Some new pics. Time to break in the engine now
I still need to finish adjusting the break as the fronts do not engage very well.
Also need ot adjust the exhaust wire so I can use the Novarossi EFRA-2096
I still need to finish adjusting the break as the fronts do not engage very well.
Also need ot adjust the exhaust wire so I can use the Novarossi EFRA-2096
#2435
Does anyone know any other bodies that fit the serpent besides the serpent ones?
I also did 4 tanks on idle, 2 tanks at 1/4 and 1 half throttle. Need to do one more at 3/4 and then start opening this engine up.
I also did 4 tanks on idle, 2 tanks at 1/4 and 1 half throttle. Need to do one more at 3/4 and then start opening this engine up.
#2436
Anyone know where I can buy a 2.0 pr 2.1 e buggy? I know this is the Nitro thread but hoping someone may be able to help me locate a nice roller.
#2437
#2438
#2439
Was doing some wiring during the weekend. Had a small piece and decided to make my own air filter holder thingy
Gave an extra 1hp, you should try it!!
Gave an extra 1hp, you should try it!!
#2440
Super Moderator
iTrader: (63)
Join Date: May 2005
Location: a very small town in wisconsin that is in the middle of absolutely no where
Posts: 5,155
Trader Rating: 63 (100%+)
looking good. been making my own for a while just not as fancy as yours.
#2441
#2442
#2443
Bittydesign Force is supposed to fit.
Oh well, I'll stick with OEM body
#2444
#2445
Sorry, I thought amain still carries them.
Check out Jconcepts Punisher at Stormer hobbies.
Check out Jconcepts Punisher at Stormer hobbies.
Yup bought the last two they had! Thanks