How long did it take to build your M07? Less long than it took to build the M05? Going to order one through RCmart.

It could be done in an evening. Plannng is a good idea.

cool ill order at the end of the month. i forgot i cant this month wait to see if all the hopups are out.

YOU HAD ONE JOB, DROOP SCREW INSTALLER GUY, ONE JOB!"

V2R manual says 53573. Tamiya really doesn't make it easy to find out which pistons are compatible with which bodies in case we want to try something other than the original 3 hole

Found it. It's listed in the manual for the TB Evo.6 MS...blah, blah, blah. The 05 v2 R appears to use a short TRF damper, but not the big bore version. It's p/n 19804876.

Huh. You're not wrong. I've always thought the R spec shocks were big bores, but nope, I just measured them against the 42291 big bores. Outer dimensions appear identical, but the inner bore is 0.5mm narrower on the R spec. I guess that explains why the standard ones have a smooth edge around the top collar and the big bores have the knurled edge.

Can the TRF419 shocks be used with the M07

why you showing off your handy work again, Sharpie??

Ok so a M07 pulls 1.7G. Who makes that camera?

https://xon.cerevo.com/en/

looking at the UI text, I'm guessing this would be the unit..

LOG-1 sensor to be exact.. GoPro camera

Tamiya/MazdaCup Race

...so that's what that little 'platform' included with the M07 kit is for...

I wish, but alas mine is still enroute.

I'd me more interested in knowing what g-force an M-05 can pull on the same track with the same tyres.

that little Demio is growing on me