Usgt action at the village
Audi r8 and lexus

another good weekend for the Thunder Mclaren Championship

Thunder Raceway

Finished up a Super GT Miku body

Awesome!

Anybody run the R34 Nissan Skyline? Looking for some thoughts on that body, been running the ZL1 Camero but considering a change.....your thoughts?

I did enjoy this body:
https://www.tqrcracing.com/shop/prod...asp?p_id=11221

but you honestly need the HPI wing for it to be competitive.

I like the look of R34 version better.

If I had that paint job on my race car, it would never get near the track let alone on it. Nice Job!!!

Outdoor tires the same as indoor or are they a different comound

Same tires

My LHS just found these old Matrix Line bodies lying around a warehouse and bought a bunch. Among them are LFA bodies with carbon print. They were 10 bucks so I picked up one and tested it out last night. Kinda hard to see with it being so dark, gotta add a bunch of bright stickers on it, but it handled surprisingly well.

Is that run on a bd7, I'm currently mounting a r32 body on my bd8

Is that a standard TC wing used with standard nsx wing mounts?

hi everyone im starting to run this class my car is a cyclone s with a speedpassion 21.5 and a fdr of 2.43 i would like to know a combination of spur and pinion for a fair top speed, can anyone help me?

it's all going to depend on track size. what i run at my track may not work wel for yours.. a really low FDR (under 3.0) is not going to work on a track with a short straight away; and conversely, a high FDR (4.0+) won't work on a track with a mega long straight

but you'll probably want to shoot for a FDR or 3.9-4.0 for a start. I also think the 2.43 you stated above is the IR (internal ratio) of the chassis. you should be able to find some online charts that will break down what FDRs you'd get for X pinion and Y spur.

but from my experience for the HB TC, TCX and TCXX - you're going to want to use between a 90-100t spur and then the appropriate pinion(s) from there. also, my experience with the SP motors, is they need a little lower FDR to get all the power out of them - i've run a couple before and they are good, but i always had to go to a lower FDR when i ran that motor. i've since switched my last SP to my rally

i'm confused at the moment

the tires for USGT is still the ones from Gravity, right? Gravity Pro Shop Team Gravity Rc | RC Racing


and you can get them either pre-mounted, or mount your own, right??