argghhh, just typed out a long response ...somehow the site didn't post what I wrote.

in short,
awesome capri body! Loven' the camaro too!

Thanks!

Speaking of TT02s, I'm sure this subject has been beaten to death, but are there any effective aftermarket parts that address the steering slop these cars have? Something cheap like this?

http://www.ebay.com/itm/141510534923...%3AMEBIDX%3AIT

Buy a shim kit, that's the best solution for slop. You can shim the slop out of the plastic arms and not waste money on aluminium bits

Does someone make a "shim kit" for this particular application? If not, what parts do you recommend? Thanks by the way.

steering you would need 3mm shim kit 53585

http://www.tqrcracing.com/shop/produ....asp?p_id=1809

suspension on TT02 standard probably 4mm shim kit 53586 - I have the type s which requires 3 mmm

http://www.tqrcracing.com/shop/produ...w.asp?p_id=623

axles usually 5mm shim kit 53587

http://www.tqrcracing.com/shop/produ...w.asp?p_id=622

Thanks a whole bunch there breyton.

After starting parking lot racing with some friends this summer with equal build TT-02, the indoor season brought a big surprise with three more guys taking on the "challenge". Today it all came together and we nearly blocked the track 😂
It was nice to see everyone having a big smile on his face while driving and enjoying the look of these beauties on track. A friend made a short video. I couldn't copy a link with the Ipad, but you will find it on Facebook looking for Gregor König - RC Car.
I drove the E30 M3. Unfortunately several bearing failures gave me a rough start...(as you can see on the video). In the end I got pole and could win one of our many fun races.

Now the link to the video:
https://www.facebook.com/gregorrccar...6136698852048/

Driving TT-02 is all about fun and beautiful bodies for me. Finally I can drive my 1:1 car as 1/10 RC car with this beautiful body:

Nice photos you have there. Good looking body. Do you know what the part number is for that body set?

Carisma 15440

Just one more picture of this beauty with more fitting wheels:

Did you paint the body yourself or buy the prepainted?

Mine was unpainted, but already cut.
There is also a painted and rtr version on the market. It costs around 100€.

The number of activities shows how good this chassis is. Nobody seems to have problems xD
Just a strange german guy hangs around to show off his bodies...
So here we go again:











Super GT GT500-class Calsonic Impul GT-R made from Motul-Autech GT-R Body kit and a Tamiya Calsonic sticker sheet.