15LikesRayaracing sleeve resizing and tooling
05-17-2016 | 03:37 PM
#1292
Tech Regular
iTrader: (2)
Joined: Jun 2006
Posts: 425
Thank you sir ... Im super excited to get them back - especially that RB mods set. Well and the Ninjas ... and really curious to see how that modded Jammin .28 goes ... no idea who did that work. I inherited that one :-)
06-07-2016 | 04:42 PM
#1293
Tech Rookie
Joined: Jun 2016
Posts: 2
Hi RayA,
I had a Nova ToroNero, I did proper break-in and race for two times, every time fire up with heat gun, everything fine, but after I put it back for a year. the cylinder taper part like deformed,the piston cannot pass the bottom part of the cylinder, even I heated it up to 120 degree C.
Before I store, I put after run oil, not let the piston trap at the TCD. Seems everything did right, but now the piston can go only 1/4 of the cylinder
Will u do this service for the piston so it can back to normal again?
Many thx!
I had a Nova ToroNero, I did proper break-in and race for two times, every time fire up with heat gun, everything fine, but after I put it back for a year. the cylinder taper part like deformed,the piston cannot pass the bottom part of the cylinder, even I heated it up to 120 degree C.
Before I store, I put after run oil, not let the piston trap at the TCD. Seems everything did right, but now the piston can go only 1/4 of the cylinder
Will u do this service for the piston so it can back to normal again?
Many thx!
06-09-2016 | 11:59 AM
#1294
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
ship it
Hi RayA,
I had a Nova ToroNero, I did proper break-in and race for two times, every time fire up with heat gun, everything fine, but after I put it back for a year. the cylinder taper part like deformed,the piston cannot pass the bottom part of the cylinder, even I heated it up to 120 degree C.
Before I store, I put after run oil, not let the piston trap at the TCD. Seems everything did right, but now the piston can go only 1/4 of the cylinder
Will u do this service for the piston so it can back to normal again?
Many thx!
I had a Nova ToroNero, I did proper break-in and race for two times, every time fire up with heat gun, everything fine, but after I put it back for a year. the cylinder taper part like deformed,the piston cannot pass the bottom part of the cylinder, even I heated it up to 120 degree C.
Before I store, I put after run oil, not let the piston trap at the TCD. Seems everything did right, but now the piston can go only 1/4 of the cylinder
Will u do this service for the piston so it can back to normal again?
Many thx!
Ray
06-12-2016 | 09:38 PM
#1295
Tech Rookie
Joined: Jun 2016
Posts: 2
Ray,
Just send out the cylinder to u. It will take some time as I ship from Hong Kong.
pls. check and let me know can it be fixed and price.
Thx!
Andrew
Just send out the cylinder to u. It will take some time as I ship from Hong Kong.
pls. check and let me know can it be fixed and price.
Thx!
Andrew
07-28-2016 | 01:20 AM
#1299
Tech Adept
Joined: Feb 2011
Posts: 199
You guys need to get a room all ready.
08-31-2016 | 06:29 AM
#1302
Tech Fanatic
iTrader: (23)
Joined: Nov 2002
Posts: 833
From: 4373 Creek Road Chaffee,NY 14030 USA (716)783-5198
The company I work for had a massive fire a few weeks ago so with that said my focus is on my day job Mon thru Friday, putting my resizing orders off a few more days than normal. So allow 3 or 4 business days in my shop please. Thank you
Ray
08-31-2016 | 05:07 PM
#1303
Joined: Dec 2009
Posts: 2,654
From: Warsaw Indiana
Ray can i get price on sizing tooling?