21Likes

New LRP Flow Esc

Reply Subscribe

Thread Tools

Search this Thread

01-23-2016 | 06:59 PM

#1501

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

Quote:

Originally Posted by cyclonetog

Hi guys,

I just tried to flash my flow works team to mod firmware. I left everything alone while it was updating, but it failed part way through. I came back to this message and now it won't reconnect. Is there anything I can try?

I had this happen and unfortunately nothing worked and I had to send it in to be reflashed.

01-23-2016 | 07:01 PM

#1502

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

Quote:

Originally Posted by N15M0

So any capacitor will do?

Yes. The bigger the capacitor rating the better but you will be fine and hard pressed to notice a big difference so long as you are running 2s Lipo.

02-13-2016 | 01:51 PM

#1503

MeBeMikey

Tech Adept

Joined: Jun 2011

Posts: 100

Hey Luke, Three times I tried to do the update. The first time my computer was dead, next the updater failed to open properly and then 3rd time it wouldn't connect at all. I have used it several times to update firmware and never had a problem. I am going to stick with 5.4 as it seems the Universe is telling me to stick with it. I listen to the Universe and I am not happy with its decision.

See yah tomorrow. 5.0 vs 5.4

Mike

Quote:

Originally Posted by Bar

If you pm me your email I can send you the V5 Firmware which is what all the team drivers here seem to use, wish I would of known this when I got mine, have since switched back to Hobbywing but miss the braking feel on the LRP so may give one another go with the right Firmware on

02-14-2016 | 12:25 AM

#1504

silden

Tech Fanatic

iTrader: (12)

Joined: Dec 2012

Posts: 982

From: Los Angeles

Quote:

Originally Posted by Bar

Hi,
What is the difference between the 4.7/5.4 and the 5.0 firmware?
Thank you

02-14-2016 | 01:40 AM

#1505

cplus

Tech Elite

iTrader: (11)

Joined: Jul 2010

Posts: 2,741

Explained in the fact sheets when you download them.

Specific firmware for stock, mod, onroad/off etc.

02-14-2016 | 04:24 AM

#1506

rendangubi

Tech Adept

iTrader: (1)

Joined: Apr 2012

Posts: 109

From: Parit Buntaq

hello...
what is the best start ratio for flow worksteam + x12 13.5t firmware v5.4 track about 35-40 meter long...and i'm running boosted ....tq

Last edited by rendangubi; 02-14-2016 at 04:51 AM. Reason: add information

02-14-2016 | 06:58 AM

#1507

silden

Tech Fanatic

iTrader: (12)

Joined: Dec 2012

Posts: 982

From: Los Angeles

Quote:

Originally Posted by cplus

Explained in the fact sheets when you download them.

Specific firmware for stock, mod, onroad/off etc.

I know that 5.4 is stock, 3.8 is off-road and 4.7 is mod.
But what is 5.0.

02-14-2016 | 07:06 AM

#1508

geeunit1014

Tech Champion

iTrader: (14)

Joined: Sep 2005

Posts: 5,839

5.0 is the old stock software. 5.4 is the newer stock software

02-16-2016 | 11:10 PM

#1509

Dual Fuel

Tech Apprentice

Joined: Jan 2009

Posts: 97

Hi guys, is there any way to know what firmware version is in the speedy as i got it second hand, but I dont have the bridge . thanks in advance

Last edited by Dual Fuel; 02-16-2016 at 11:45 PM. Reason: being stupid

02-18-2016 | 01:12 PM

#1510

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

Quote:

Originally Posted by Dual Fuel

Hi guys, is there any way to know what firmware version is in the speedy as i got it second hand, but I dont have the bridge . thanks in advance

No, I don't know if any way except for the bridge. You can maybe narrow it down to a few firmwares based on how many programming modes you have access to but it gets trickier after that.

02-18-2016 | 01:14 PM

#1511

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

New LRP speed control coming soon

I'm hearing there will be a replacement for the LRP Flow released in Summer around July.

02-18-2016 | 02:19 PM

#1512

swerv512

Tech Regular

iTrader: (21)

Joined: Jan 2007

Posts: 424

From: SF Bay Area

Quote:

Originally Posted by Racing4Evo

I'm hearing there will be a replacement for the LRP Flow released in Summer around July.

I was just about to pickup my third FWT ESC... maybe i'll wait now.

02-19-2016 | 09:53 AM

#1513

piorc

Tech Regular

Joined: May 2004

Posts: 362

From: Campinas

Hey guys, im using my LRP FLOW with Trinity D4 13.t in blinky.

Any advices on setup ?

02-19-2016 | 10:05 AM

#1514

silden

Tech Fanatic

iTrader: (12)

Joined: Dec 2012

Posts: 982

From: Los Angeles

Quote:

Originally Posted by piorc

Hey guys, im using my LRP FLOW with Trinity D4 13.t in blinky.

Any advices on setup ?

I suggest to use the 4.7 "mod" firmware and set it to blinky-mode 5 and 6 to zero. The main difference between the 4.7 and 5.4 firmware are that the brake on the 4.7 feels stronger and the throttle on the 5.4 is a bit more aggressive. I only use the 5.4 for boosted stock and 1/12 mod classes.
I hope this helps.
Denis

02-19-2016 | 11:37 AM

#1515

Racing4Evo

Tech Elite

iTrader: (2)

Joined: Sep 2002

Posts: 2,118

From: SoCal

I think you can use 5.4 just change the brake mode from the default setting which is pretty bad IMO. I like the brakes on 4.7 better but 5.4 has much better throttle feel for stock.

I usually run5.4 firmware settings: 5,2,2,6,0,0,0

Reply Share

First
Prev
101 / 123
Next
Last