95LikesTekin RSX Thread
07-27-2015 | 08:50 AM
#856
The Hotwire must be attached to the PC device to view saved runs.
07-27-2015 | 03:59 PM
#857
Tech Regular
iTrader: (36)
Joined: Apr 2012
Posts: 413
I'm sure that this has been asked before, but is there a right and wrong way for the fan to go,,I actually was questioning this for an rx8 initially, but looking at my rsx I'm not sure if it's on correctly either
Last edited by mxturd; 07-27-2015 at 04:09 PM.
07-27-2015 | 04:45 PM
#858
08-14-2015 | 04:42 AM
#860
Tech Adept
Joined: Apr 2014
Posts: 125
From: Sydney
Hi Tekin / Randy / fellow Tekin motor owners,
Is there a motor rebuild guide somewhere on the Tekin site? I've had my redline gen 2 motor for over a year now. The motor has been going great without any issues. I thought it might be a good time for a clean and inspect, or rebuild?
I've never done it before, so a guide would be great.
Reason that I ask if there was one on the site is because I mostly use my mobile device (phone). I can't really search much when on mobile site mode
Is there a motor rebuild guide somewhere on the Tekin site? I've had my redline gen 2 motor for over a year now. The motor has been going great without any issues. I thought it might be a good time for a clean and inspect, or rebuild?
I've never done it before, so a guide would be great.
Reason that I ask if there was one on the site is because I mostly use my mobile device (phone). I can't really search much when on mobile site mode
08-14-2015 | 06:21 AM
#862
Tech Adept
iTrader: (2)
Joined: Jun 2014
Posts: 157
Here's a youtube video with a full Gen 2 tear down and rebuild.
https://www.youtube.com/watch?v=SsCdk718yKQ
It's not mine.
-W
https://www.youtube.com/watch?v=SsCdk718yKQ
It's not mine.
-W
08-14-2015 | 10:42 AM
#863
Tech Master
iTrader: (30)
Joined: Jun 2015
Posts: 1,974
Clicking noise
My RSX is causing my motors to make the clicking popping sound (tried four different motors) and others are having the same issue( there is a video in this thread). My car which is a Aero K1 being all carbon fiber will actually amplify the noise and it is quiet prominent when driving. Tekin has said they are aware of the issue and they were almost done with the update...that was a few weeks ago, so I would just like to know when it will be released as this noise is kind of getting annoying.
08-14-2015 | 02:34 PM
#864
Tech Adept
Joined: Apr 2014
Posts: 125
From: Sydney
Here's a youtube video with a full Gen 2 tear down and rebuild.
https://www.youtube.com/watch?v=SsCdk718yKQ
It's not mine.
-W
https://www.youtube.com/watch?v=SsCdk718yKQ
It's not mine.
-W
08-14-2015 | 05:45 PM
#865
Tech Adept
Joined: Apr 2014
Posts: 125
From: Sydney
Hi again
Motor tear down and rebuild went really easily. Thanks Wanderer77 for the video link.
Does anyone know the "out of the box" timing setting for a Gen2 17.5t. I forgot to note down before I pulled motor apart. I want it back at stock setting which suited me.
Motor tear down and rebuild went really easily. Thanks Wanderer77 for the video link.
Does anyone know the "out of the box" timing setting for a Gen2 17.5t. I forgot to note down before I pulled motor apart. I want it back at stock setting which suited me.
08-14-2015 | 08:32 PM
#867
Tech Master
iTrader: (30)
Joined: Jun 2015
Posts: 1,974
RSX not able to run Reedy
Hoping someone can answer this question as I just bought an RSX and now am reading the Reedy can't be run without clicking noises. Can anyone confirm if Tekin has fixed this and does it also apply to Orion motors or SMC?
08-15-2015 | 04:44 PM
#870
Trying to find replacement fans (TT3833) for the RSX but am not having much luck. Any info on where to get them online thats a reputable place or do I need to put a call in to Tekin. Surprised Amain or Tower doesn't have them