the mid kick-up inserts were blanc here too
I asked Ryan..

Where did you find those selections? Most of the setups I see run B on the front camber links.

I removed the front shocks to check some things and noticed that the droop was being limited to 106mm by the shocks vice the droop screws.

You can unscrew the shock rod ends a couple of turns and pick up a few more millimeters of droop. I have run my car like that and didn't have any trouble with the shock bladders. More droop and ride height tends to make the car feel a little numb and more forgiving.

Absolutely, I was just noting the difference

As for Lutz' setup, he ran 0° sweep and 11.5° kick up and the front camber link was in position B (per conversation with him via Facebook).

Edit

Dammit Graham, cut it out Part numbers?

Edit

Big props to Tekno, i just built the car and im pretty picking on a few things and it went together butter smooth....Now lets see if it can handle as well as its built

what other bodies will fit this car?

FTW has a body for the NB48 mate

This is the FTW Reactor body on my NB48.http://www.rctech.net/forum/attachme...1&d=1417877087

Search this thread for FTW, Nightfox and Bittydesign. None from the Jconcepts
or Proline yet.

What did I miss?

Released new product info prematurely.