31LikesFutaba 4PX
11-06-2014 | 04:38 AM
#721
Joined: Feb 2010
Posts: 2,037
From: Valley Cottage NY
thanks guys. but i did all of that... i believe the radio itself is not transmitting a signal... gonna call tech support today...a friend at my local track did one of his... and with it not bound yet it showed a blinking green light... when he bound it, it turn solid green... mine all stay solid red... press the SW button and it blinks red a few times the goes back to solid red again...
This is going to sound stupid but did u actually turn on the radio or hit the display button. The reason being if ur in display mode no rf frequencys will work.
11-06-2014 | 05:37 AM
#724
Tech Adept
iTrader: (8)
Joined: Sep 2011
Posts: 100
Aluminum cases although nice, they can get scratched up easily and are heavy. Anyone using a Pelican or other plastic carrying case? They are comparable in price to an aluminum case but might be a tad lighter and completely waterproof.
11-06-2014 | 11:54 AM
#727
11-11-2014 | 03:33 PM
#733
Tech Regular
Joined: Jun 2004
Posts: 271
From: Madison, Alabama
I have tried to pair a few of the T-FHSS and S-FHSS receiver. The LED o n the receiver will blink green. I would push the switch on the receiver down and hold it down for a minute or more, but the LED would not come on after I released it. Finally, I erased all the data for that model memory and reset the type of receiver. Then I was able to pair/link the receiver.
11-13-2014 | 01:56 PM
#735
Tech Regular
Joined: Jul 2007
Posts: 391
From: assen (holland)
In the manual the say if you use only futaba digital servos choose digital in the transmitter settings.
But if you use other servos digital or not .use the analog setings.
Wat are your guys finding about that?
I tryed both settings and find no differens.
But if you use other servos digital or not .use the analog setings.
Wat are your guys finding about that?
I tryed both settings and find no differens.