38LikesTekno ET48 Thread
01-13-2014 | 03:46 PM
#1261
Tech Rookie
Joined: May 2012
Posts: 8
From: Odessa Texas
shock oil
compared to losi shock oil, tekno 500 an 600 wt. is what. I was gonna use the factory oil but sqeezed to hard and blew the top off , oil went all over the counter top. not enough left to fill both front shock. 
01-13-2014 | 04:24 PM
#1264
01-13-2014 | 04:35 PM
#1265
I knew that had to happen to somebody other than just me, made a big mess!!! LOL
01-13-2014 | 05:29 PM
#1270
01-13-2014 | 06:07 PM
#1272
What about their diff oils? In the ET48 manual, they use wt. I have older Kyosho diff oils that are cst. Are they equal to Tekno's? Also, are the Tekno 20k and 10k diff oils included in the kit?
I may have asked the last question before. Sorry if that's the case.
I may have asked the last question before. Sorry if that's the case.
01-13-2014 | 06:10 PM
#1273
Tech Adept
Joined: Jun 2008
Posts: 176
From: South Texas
I'm pushing it, with my current batteries trying to get 8 hard min's, and at the end there puffers. Thats on the RC8t much heavier.
01-13-2014 | 06:16 PM
#1274
touché
I was hoping for a higher discount than $90 in December, but I ended up letting that pass and got stuck with $75. In my mind, I was going to hold out til $90 came back, but seeing it in-stock got me. I don't spend enough at Tower to get a coupon like that one. That's a Gold member coupon, right? Or does Tower consider you to be an international customer?
I was hoping for a higher discount than $90 in December, but I ended up letting that pass and got stuck with $75. In my mind, I was going to hold out til $90 came back, but seeing it in-stock got me. I don't spend enough at Tower to get a coupon like that one. That's a Gold member coupon, right? Or does Tower consider you to be an international customer?
01-13-2014 | 06:33 PM
#1275
Tech Adept
Joined: Jun 2008
Posts: 176
From: South Texas
Hey wild man... Damn, another Tekno to buy... Hell I've barely got the NB48 under my belt. Friggin expensive habit I've picked up. So with only ~4 truggy entries @ RCHQ on any given Saturday, chances are we're going to have to race with the nitro guys. Don't know how RD will manage this, but I'm thinking 5 or 6s setup as I've read they could have the run times if they go to 15 minutes or more. Something like 3850/4400mah with 1700kv+5s or 1400+6s. Any thoughts on this?
