It still seems like a big jump when the kit setup for the buggy is 7/7/5 but I'll go along with it.

If you dis the kit setup, your preorder may end up on the bottom of the pile.

There is slightly less resistance in our diffs because of the tooth profile of the internal gears. So we use slightly heavier oil as a result.

For the shocks, it's not 60wt - it's 600cst. It's about 42.5 - 37.5 wt Losi comparison.

LOL, you never know...

based on the manual, so there are new sets of sway bars?

Also, nice to see the 8 x 1.3mm pistons included!

How are the springs, more progressive or linear?

Standard springs, just different coil numbers and stuff.

anyone know what price are et48 kit ?

Pre-orders start next week, so we will know then. Believe me, we've all tried to get this answer out of them.

Stormer has it listed at $570 so I would imagine it would be somewhere between $50-80 more than the buggy at whatever shop you choose.

'Street Price' is $599.99. Don't forget that it comes with all of the hopups that the EB48.2 came with right out of the box (aluminum stuff, angled rear gearbox, straight cut gears, etc.).

its alive alive
it on the tekno website now ready to perorder

what all do we have to buy to complete the kit outside of the normal, wheels, tires, etc?

I am assuming an aluminum servo horn? anything else?

hahah it was showen instock when I went to order it it shows outstock now dam that was quick

Just testing out a few things before we set it live. It will be another day or two. Sorry for the false alarm. Thanks.

That's about it. It comes with all of the other hop-ups. Springs and sway bars maybe.