I've got a v2.1 120a xerun esc and running an 8.5t motor in an associated b44.1 i want to run some timin and boost to make it keep up with the guys running 6.5t motors which software should i use (stock boost timing or mod with boost) and wahts is a nice mild boost and timing profile to use. Thanks

thanks guys, Multifuncton is the one I wanted, now have it. most are still selling the 2 in 1 box PRO box.

anyone want to share setting for 1s 13.5 WGT?

Ask brian about the set up..he once had the 1S HW in his wgt..

Hello guys, I'm new to hobbywing esc and electric car.
I have a v2.1 and I want to learn something about this esc, working mode, firmware update (original firmware, mod firmware?).
I don't know which possibilities offers the firmware to get the best from my esc, but I know that the world about these firmwares is so big, where can I read something ?
Thanks.

Please send me an email at [email protected]

Use 930mod

hi I have a HW 1s that I bought second hand, the seller did not include the heatsink. Will I need the heatsink if I were to run 2s 10.5t pan cars and TC? Or will a bracket + fan be OK? If not where can I get the heatsink separately? Thanks.

edit: I have some heatsinks cannibalize from a dead pc. Will that work if I stuck it on with heat grease + ratchet ties? (ugly but don't know where to get heatproof double sided tape).

Is it a v2.1 or a v3 / v3.1? As far as I know you cannot run 2s on the newer 1s speedos, at least that´s what the manual claims.

I bought it a while ago so I think I'm OK with 2s.

OK, a bit of an "out there" question. Does anyone know where I can get new bearings for the Hobbywing Xerun motors?
I have a couple of Hobbywing Xerun motors that still work good except the bearings are starting to get a bit noisy, and I'd like to be able to just replace the bearings rather than having to get a new motor.

Cheers
Rob.

Rob, I think this will tell you what you need to know:
http://www.hobbywing.com/product_show.asp?id=268

It states: Size: 3.175mm(Internal diameter) * 9.525mm(External diameter) * 3.967mm(Height)

I'd go grab the right size from your favourite supplier.

Phil.

Any idea when the V3.1 1S will be ROAR approved?

Thanks.

The v3.1 1S is roar approved.

Hi guys

Just to let you know i dont have a confirmed date of release of the updated v10 motors series orvthe confirmed roar approval date.

I can confirm we do have a bandit series of the v10 coming soon for club racing or for racers who want enormous power but dont run sanctioned events.

We also have a special esc to be released next feb 2014 in time for titc and special for zero timing .it will be called the HW Zero based around the v3.1 series.

Thanks for reading guys

Angelo

Thank you!

ROAR's list isn't updated then. What a shock!