do it.

BTW those are real on mine.

I might need her ring then too bwahahaha!

not sure if this is the right place for this question but how do you make the throttle sit at zero in the data logs when your tx is in neutral? i've calibrated and re calibrated the tx and it still says -20 when in neutral and full throttle is 69.8

A mullet and a Lamborgini, great combo!

What data does it log?

Because i can't find info on that for the life of me.

I'm counting down the days until this this will be released... I really hope its this month... .... and that there aren't any bugs that will need fixing!

There is no bugs that I have found its way smoother and nice to use the data logging is good for a look at gearing etc and temps

And plugging into the fan port for any changes is great so you don't have to keep going to your receiver.

I have been running mine with the new HD 4300 pro 4 550 can and its a awesome combo in a Tekno SCT

When can we expect to start seeing RX8 Gen2 Combo's? Also, will they be available in combo with the T8i? Preferably the 1950

TPS, motor temp, motor rpm, esc temp and volts. Missing the biggest measurement, amps.

I can't for the life of me figure out how to put my pro4hd in sensored only mode. It's not in the timing tab like on my rs gen2. Any suggestions?

The RX8 only runs in dual (or completely sensorless) mode. Sensored only provides too much timing to 4 pole motors.

Yep, no sensored only. 4-poles don't really like it and we don't want boost or turbo on them.

Just waiting for our Xray XB9E's to ship

Bent

XB9E?

You mean a conversion kit right?

I should receive my RX8 Gen2 soon too, can't wait to compare it to my previous RX8

Nope......no conversion.

I have 3 kits on order to replace our Serpent's.
The Xray factory are packing kits as we speak.
Release presentation will be out very soon !

XB9E kit #350151

Bent