Well I got my 2nd race on the truck at The Pro Line shoot out in Maryland Saturday at the track race way. Qualified 7th in the A and after a bad start/hack attack. I worked my way back to 4th and ended up 5th after a good battle there. The track did not have a single area that was smooth bumps were all over. The truck was great. Here is the setup for the guy at the track that asked sorry I forgot your name. I ran nothing crazy small change from stock.

I got 11 mins on a nano 6000 pro 4 4600 tekin rx8 and for the sc10 hubs you got to file em down a lot on the back side if not they rub on the bearings and housings.

Thanks, hmm not sure if my 5600's would be enough then.

I filed down the back side of the hexes you have to take a lot off so when you tighten down your wheels it doesn't bind against your bearings and I was also going to put in a shim between the bearing and the pin to make sure.

how did you like it compared to your sc10 4x4 or have you raced it yet?

Cain can chime in with great info. to compare the two. I talked to him via pm and his opinions on both is the reason why I picked up the sct410 ......

What steering servo should I get for the sct410?
?

Haven't raced it yet or seen if I'm faster yet or not but I seem faster smoother and can do our big jump that I can't even think about doing with the sc10. So far I'm happy with the truck it's fun driving short course again.

XP1015
Savox1258 are good choices

anyone here using a 2 pole 4.5 550 motor? if so, how is it working out for you?

I like the Savox 1256 or 1258...they draw some power tho so you might need an external BEC depending on your esc or rx.

Im using a Reedy Sonic 550 4.0t....geared 16/44. ...I only run max throttle at 80% cause it rips. Granted im running on a medium size tight indoor track. I gotta do some more esc tuning but for now its punches good and has decent tq.

Hope that helps!

The 2 pole will work if you have it already, but if you are in the market, go 4 pole, more torque and run cooler.

TravisT, Yes we will have carbon fiber towers shortly.

Save a set for me!

I run the Tekin SC4x 4.5 and love it. I have a 4400 pro 4 sitting in my box I dont use in favor of it even. Great motors, the only thing I changed out id the rotor. I am using the optional high torque in it.