2LikesTekno RC EB48 Thread
03-05-2013 | 10:08 AM
#5132
I hear ya
Iam holding out on buggy to waiting for an after market body and
Also tekno is working on a solution for the servo saver set up which is still causing problems they thought it was the spring causing the problems which has been changed in second run i beleive but even so it has not solved the issue
Tekno has said that they will let us all know when they have solved the issue/s with servo saver set up
I hope this soon great to see tekno is actively involved in making this buggy better then it already is
Once this is done I will buy the buggy
Iam holding out on buggy to waiting for an after market body and
Also tekno is working on a solution for the servo saver set up which is still causing problems they thought it was the spring causing the problems which has been changed in second run i beleive but even so it has not solved the issue
Tekno has said that they will let us all know when they have solved the issue/s with servo saver set up
I hope this soon great to see tekno is actively involved in making this buggy better then it already is
Once this is done I will buy the buggy
I think Tekno did an awesome job with the body. It is very functional (it fits the chassis very well) and looks better than 90% of the other electric bodies out there.
03-05-2013 | 10:14 AM
#5133
I agree stock body is great. And for the servo saver mine is super glued together.
03-05-2013 | 11:37 AM
#5134
Tech Adept
Joined: Dec 2011
Posts: 109
From: NJ
Allright guys I couldn't hold out any more I just ordered my eb48 today I have to say the guys at Tekno were great they answered all my questions and Matt even suggested some options to order for hop ups. I was totally impressed with sct410 I cant wait to get the EB48. In a few days it will be like xmas in march 
.
.
03-05-2013 | 12:32 PM
#5136
Tech Adept
Joined: Dec 2011
Posts: 109
From: NJ
Here are some:
"TKR5036XT Suspension Arms (xtra tough, front, 2pcs)"
1 "TKR5030XT Suspension Arms (xtra tough, rear, 2pcs
2 "TKR5073 CV Rebuild Kit (front/rear, for 2 axles)"
1 "TKR5034 Hinge Pins (outer, rear)"
Just bere in mind that the quality of Tekno's products are second to none by the way I can see on my sct410---hope this helps.
John
"TKR5036XT Suspension Arms (xtra tough, front, 2pcs)"
1 "TKR5030XT Suspension Arms (xtra tough, rear, 2pcs
2 "TKR5073 CV Rebuild Kit (front/rear, for 2 axles)"
1 "TKR5034 Hinge Pins (outer, rear)"
Just bere in mind that the quality of Tekno's products are second to none by the way I can see on my sct410---hope this helps.
John
03-05-2013 | 01:34 PM
#5137
I was thinking of the Suspension Arms, but I have two regular spares for now, so I'm keen to see how I go. If they break, I'll definitely get the new ones.
Thanks for the ideas on the other parts, I'll look into them.
Thanks for the ideas on the other parts, I'll look into them.
03-05-2013 | 01:49 PM
#5138
Tech Adept
Joined: Dec 2011
Posts: 109
From: NJ
John
03-05-2013 | 02:14 PM
#5139
Tech Adept
Joined: Jan 2013
Posts: 205
i really want tekno to fix servo saver set up problem then i will order my buggy
03-05-2013 | 02:20 PM
#5140
Tech Regular
Joined: Dec 2012
Posts: 297
From: Riyadh, Saudi Arabia
don't even think about wasting your money on anything in the rc cars world rather than 1/8 scale buggy.
Tekno is your top choice and you did the right decision.
03-05-2013 | 04:07 PM
#5141
-Eli
03-05-2013 | 04:17 PM
#5142
Tech Addict
iTrader: (1)
Joined: May 2010
Posts: 609
From: oakdale,new york
this thing about the body is quite strange to me,the stock one hugs the chassis and allows virtually no dirt in,and a fancy,if desired, paint job makes it quite nice. to say the purchase of this kit hinges on the body does not make sense to me....
03-05-2013 | 06:30 PM
#5145
Tech Adept
Joined: Jan 2013
Posts: 205
what is the max amps that your radio post servo draws on stall at lock up the viper is pumping out 7volt at 5amps will it be enough these hv servos are current hungry
lrp esc offers 6volt at 6amps and 600amps per phase have you considered this esc!
lrp esc offers 6volt at 6amps and 600amps per phase have you considered this esc!