whats every one running in the be whats setup and any pic on how to fit in a hw 150 amp esc in it

Hey raven I'm not sure how to post pictures on here so text me at 757 513 2461 and i can show you how mine is installed and wired

Tekin RX8
TekinT8 1900KV
Hitec 7950 servo
Futaba R614FS rec.
Vampire 70C 6800mAh good for 24-25 minutes (we do 40 min finals)









Bent

Very nice

Thanks

Can't wait to try it out with the 2.0 upgrades when season starts again.

It should turn out to be an improvement on a few of the rutted out tracks I run on.

Bent

i am from oz you better off msg me and email me your pics mate

I just replaced my front shock tower with the aluminum tower since I broke the CF tower. When I mathced the towers with each other I noticed the geometry was different with the camber links and shock mounting holes. In paticular the shock mounts are way wider. What does everyone do about these differences?
Nvm... I got the truggy tower.

here you go raven, had to have wife do this as I am challenged by technology

yeah i want to fit a hw wing 150 amp esc in it thats why i ask cant aford tekin atm

I'm not familiar with it but speed passion silver arrow is cheaper, works great and is very close to tekin in size

So you guys do pit stop, do you have a video and how long are your stop at the pit?

Nice pics by the way !

Yep.....we do 1 pit stop.

It's roughly the same time as 3 fillings for the fuel guys

Not sure if I have a video of specifically a pit stop though

And thanks.

Bent

has any one easl put a hobywing 150 amp in the serpent fit ok

I was using the xerun 150a for last season with zero issues.
It is a tight fit, but it is possible.

is it worth the try or dont worrie about it