2LikesTamiya TB-Evolution IV
10-17-2004 | 01:28 PM
#1548
Tech Regular
Joined: May 2003
Posts: 387
From: Dordon , England
Originally posted by Chazz
So is there anything good about the IV or should i get a 415 as xmas is coming round the corner soon so i've got to make my mind up if i want a tamiya from usa as i don't want to pay 445 quid over here in rip off britian which is about $820
Chazz
So is there anything good about the IV or should i get a 415 as xmas is coming round the corner soon so i've got to make my mind up if i want a tamiya from usa as i don't want to pay 445 quid over here in rip off britian which is about $820
Chazz
10-17-2004 | 05:25 PM
#1551
Tech Initiate
Joined: Jun 2004
Posts: 32
From: Skien, Norway
Re: internal drive ratio
Originally posted by hierog
the Internal drive ration for the EVO IV is 2.294
vic
the Internal drive ration for the EVO IV is 2.294
vic
10-18-2004 | 09:55 AM
#1553
Tech Initiate
Joined: Jun 2004
Posts: 32
From: Skien, Norway
Thanks again :-)
Is the manual available online somewhere?
Or better - can someone provide me with a list of the common spur-gear sizes? I think mine has 96T now, is that standard? And what other are there?
Is the manual available online somewhere?
Or better - can someone provide me with a list of the common spur-gear sizes? I think mine has 96T now, is that standard? And what other are there?
10-19-2004 | 02:28 AM
#1555
Tech Regular
Joined: Jul 2004
Posts: 331
From: Kent
Originally posted by espeng
Thanks again :-)
Is the manual available online somewhere?
Or better - can someone provide me with a list of the common spur-gear sizes? I think mine has 96T now, is that standard? And what other are there?
Thanks again :-)
Is the manual available online somewhere?
Or better - can someone provide me with a list of the common spur-gear sizes? I think mine has 96T now, is that standard? And what other are there?
96T is the usual spur. Range available is usually 90-110T
10-19-2004 | 02:35 AM
#1556
Tech Regular
Joined: Jul 2004
Posts: 331
From: Kent
Square and Tamiya alloy shaft cups
Like the soothsayer in Blackadder..... I have news!!!!!
R10 can now get the alloy rear shaft and cup from Square STV-23R, 1800 yen and the front one-piece with cup STV-23F (although on Square's site it shows as STV-23e), 1200 yen
Also, I have had confirmation that the Tamiya alloy prop cups are to be issued at the end of October, not September as everyone was led to believe. Price for these 500 yen apiece, I think.
They are not listing the Team Bomber carbon prop at the mo, but obscurely they managed to either find or get another one for me.
Outdoor mod EVO4 finally loses its weak spot!
R10 can now get the alloy rear shaft and cup from Square STV-23R, 1800 yen and the front one-piece with cup STV-23F (although on Square's site it shows as STV-23e), 1200 yen
Also, I have had confirmation that the Tamiya alloy prop cups are to be issued at the end of October, not September as everyone was led to believe. Price for these 500 yen apiece, I think.
They are not listing the Team Bomber carbon prop at the mo, but obscurely they managed to either find or get another one for me.
Outdoor mod EVO4 finally loses its weak spot!
10-19-2004 | 03:44 AM
#1557
Originally posted by Chazz
Hi, i ws wondring what parts frequently brake on the IV except for suspension arms, hubs etc (which brake on other cars), but any parts i should get in numbers or as an upgrade
Chazz
Hi, i ws wondring what parts frequently brake on the IV except for suspension arms, hubs etc (which brake on other cars), but any parts i should get in numbers or as an upgrade
Chazz
... but I have that problem fixed now... 3mm chassis and braced upper deck (K-models) Hi grip tracks here I come -Dave
10-19-2004 | 08:32 AM
#1559
Re: k models
Originally posted by Martin Crisp
do you have a website url for these k model parts?
do you have a website url for these k model parts?
