2LikesTekno RC EB48 Thread
09-21-2012 | 02:03 PM
#2553
jason-protc3,are you gunna race lake park sunday 9-23 if the weather holds out??.i installed fioroni shock pistons and changed a bunch of suspenion settings. still tryin to get the nitro like drift handling instead of point and shoot.hope to get the electronics sorted too. seemed awful slow last sat night HAHA. sr (aka bruce b)
Im going to be out on the boat this weekend and I have some of my wifes family coming over. I will be at the next race at B&B Hobbies. I am going to make some pistons for the next race. I am going to make a variaty of hole sizes and such. I have some more setups I want to try also.
09-21-2012 | 03:28 PM
#2555
I almost forgot, I got my Nanotech 2s4200 shorty packs this week and ran them today. I'm running them all the way forward to keep the F/R balance the same. I had to drop my oils 5wt all around (back to 35/30) due to the lost weight. On the track it felt great. I had plenty of run time too. 
09-21-2012 | 04:12 PM
#2559
Tech Apprentice
Joined: Aug 2012
Posts: 58
From: odessa fl
chris, any improvement with on throttle steering when you ran with the fronts swept back? i like to power around the outside w/min let off. would rather have a little push than fight a loose rear. just now getting the loose rear sorted.sr
09-21-2012 | 04:23 PM
#2560
Tried the 10x1.3mm pistons with 60wt/50wt front/rear. It was OK. Really good through the bumps, but jump landing suffered too much. 10x1.2mm is the best so far. Great combination of landing jumps and going through bumps with more traction everywhere it seemed.
09-21-2012 | 08:16 PM
#2562
09-22-2012 | 12:30 PM
#2565
Send us an email with your address and the part #'s you need, we'll send them out to you. Sorry for the mistake.