SC10 4x4 Thread
Tech Regular
iTrader: (4)
Joined: Jul 2012
Posts: 451
From: tx rchq
http://www.youtube.com/watch?v=asA9KwKlT7w
http://www.youtube.com/watch?v=xZzsJ60TvJc
These two vids both show the SC104x4 with a Novak 4.5T 550. If your truck is WAY slower than these, you either have it geared wrong, have too much binding in your drivetrain, or have fried your motor or ESC.
http://www.youtube.com/watch?v=xZzsJ60TvJc
These two vids both show the SC104x4 with a Novak 4.5T 550. If your truck is WAY slower than these, you either have it geared wrong, have too much binding in your drivetrain, or have fried your motor or ESC.
Tech Regular
iTrader: (4)
Joined: Jul 2012
Posts: 451
From: tx rchq
the fast guy or best dive can dive this truck fast with most of the setups like elleit the mg at rchq i have him dive my truck some times and time his laps and the past 2 times he drove it he did 29s with it vary twichy but averaged 31s but with the mip in and not twichy best lap of 30s but all the laps were 30s 5laps strate but for me i did faster laps with the second set up i bet that if he use a stock slash with the same tires as me he wood when the amain but his laps all 31 or 32
well it helped me with an issue that was much like yours. But i was trying to make the truck drivable not make it beat fast guys. I was unable to even work on my driving the way it was. I was afraid of the track. Now I am much more confident and can drain an entire pack with clipping a pipe or spinning out. So it worked for me. I also use the 19t pulley up front.
No, but that wouldn't prove what I was trying to prove. Vito was asking about a Novak 550 4.5T, and said his seemed slow....I posted those 2 vids so that he could see what his motor should be driving like.
well it helped me with an issue that was much like yours. But i was trying to make the truck drivable not make it beat fast guys. I was unable to even work on my driving the way it was. I was afraid of the track. Now I am much more confident and can drain an entire pack with clipping a pipe or spinning out. So it worked for me. I also use the 19t pulley up front.
http://www.youtube.com/watch?v=asA9KwKlT7w
http://www.youtube.com/watch?v=xZzsJ60TvJc
These two vids both show the SC104x4 with a Novak 4.5T 550. If your truck is WAY slower than these, you either have it geared wrong, have too much binding in your drivetrain, or have fried your motor or ESC.
http://www.youtube.com/watch?v=xZzsJ60TvJc
These two vids both show the SC104x4 with a Novak 4.5T 550. If your truck is WAY slower than these, you either have it geared wrong, have too much binding in your drivetrain, or have fried your motor or ESC.



5Likes
