both ends popped off!!! Sir, you have skill that I can not describe. You wear tires in opposing corners of the truck and lose both ends at once. You sir mystify me. I would personally replace the end and balls. Because that does not seem normal at all. Or you could get the threaded balls and put a washer and screw on the top and lock-tite it in. But I dislike this idea because your ends might hit the washer and bind. For bashing its probably ok, but i would not race this way.

If only I could convert all of the skill with stupid problems into driving
I have replaced all the ends and balls to no avail. I remember Marcus saying he had this problem and he put captured ends on. What kind did you use Marcus?

Just posted my FT SC10 4x4 in the sales thread. Thought I would drop the link here to see if anyone is interested...

http://www.rctech.net/forum/r-c-item...ktrum-rtr.html

I am running an associated sc10 4x4, I recently switched to saddle pack batteries for better balance and would like your recommendation on a motor, currently running an rx8 and scx4 4.5. should I go with the pro 4 4000 or 4600, or something else.

Larry

Good motors for large tracks:

Tekin pro4 4600kv
Tenshock SC411 4800kv
Revtech 4XS 4800kv

Good for small tracks:

Tekin Pro4 4000kv
Tenschock SC411 4000kv
Revtech 4XS 3800kv

I run my Tenshock SC411 4600kv on both indoor and outdoor and it works well for both, I actually dont even regear it...Mostly because I am too lazy to do it.

I am without inet aside from my phone and the search from here sucks. Xan someone pm me a pic of the installed 8mm mod. Want to make sure I have mine on right

Ok thx I did it right. And I used the same holes for cambet

I should have tapped the carbonfiber. I think I over worked the screw heads and mt forearms. Looks good though.

The Showdown is over ...


Back to the buggy ...

Miss driving it more than I knew , not that I'm never gona run the truck again ..


The buggy competition at my track is among the best in the country , if you finish on the same lap as the leaders?
You drove really well ....


Still will be running the truck at least once a week supporting our Sc Saturday's @ Trcr ...

I'm running on a track I've never been to before and won't have much practice time. So in general will the 8mm help or hurt on this track, regardless of what it does.

+ YouTube Video

Thanks! I'll mess around with it a little while I am there but I'm doing maintenance right now and just want to know what the most likely option is.

I got the optional rack on last night. I have not had a chance to drive it yet, but it "looks" better. The wheels look more parallel. I also add the yellow spring up front and the 8 mm "mod" on the rear. I had to really shorten my front and rear linkages for the rack and mod. Hopefully the track is less crazy now.

Man that track is really small. I bet you will be doing like 25 laps on it........

lol I know!
I'm aiming for 8 laps in the 5 min qualifier. 38 secs is a blistering fast lap for SCT 4x4.