508 should be blinky mode

Can 2 in 1 LCD program card can change the 'modes' in the ESC without using the PC ?

Yes, press the r/p button and you can select the 3 profiles which are stored in your ESC.

So, will it be available today ? Nothing on crc's website...

No, we do not have v3 for sale today.

Brian

Team CRC

What would be a good base setup for using the Hobbywing esc running 1/12 pancar 13.5 boosted on an 80'x40' track? I am looking for advice on a starting rollout and boost/turbo settings. Not really sure where to start. Have only run blinky so far.

Whats the eta for you guys?

It depends on what is really talking about with "modes".
You can change "profil" but not a firmware, so you can change between a profil with timing and one without timing, but it won't be in "official" blinky mode.
The only way to be in "0 timing" and with the blinky led is to use the specific firmware 508.
You will be able to set 3 profils, but all without timing.

Id like to know as well...money in hand for months...

Great question, I use 508 NO_TIMING but maybe there's a better version out there!?

There has been a revision within in the latest software update, but for some unknown reason it disables the overheat protection, or at least the function to control it via the programmer.

Also, though I'm not 100% sure, I just found my motor seems to run cooler on the original version, no idea why, but I seem quicker on the old software as well.

If no boost is allowed, I would test out which is better. Personally, I run Tekin, and they're latest version is awesome. I just like the "full" capability of wide adjustment capability. That's just my opinion. Although, I've always wondered about the "amperage" thing (120a), because Tekin doesn't advertise it (I could be wrong). There are others out there that puts out the same or even better, but is it worth it to run in "stock" class? I don't know... At my local track, nobody runs that brand...not even for 1/12th class. But, for 1/10 stock TC, WGT, and 1/12....the majority of us run either Tekin or LRP.

New 508 zero timing software will be released in time with the V3 esc release which is next week.

software release will feature

over heat protection
low voltage cut off for 1s

The price of Xerun V3 in Italy is 266$...

Yeah, from what I'm seeing/reading/hearing, the 'able to buy' price of the V3, will be as near as dead on the Tekin RS Pro price from a couple of places online.

Not so sure how that will wash in many markets, I believe the Tekin is still smaller and possibly lighter (needs no fan/sink), and it will mean the Orion versions will be cheaper (again depending where you buy), with the Orion not being all 'that' much bigger in size.

So it's a hard sell for the V3, or at least could be till it gets around the net sellers, though with us being told they undervalue the brand (and thus may be locked out), if that don't happen better bargains 'will' be had from other brands.