When are you guys going to start putting some video up? There should be plenty of people with some run time on this thing by now. I saw frankL's video and the ass end looked a little loose and floppy. Anyone have any video that shows a dialed setup? If not, get some and post it up. People need to see this thing in action.

I will have some up shortly. I just need to chop it down.

my car was dialed along with rons all weekend at the midwest champs i am sure we got some tape some where

porkchop; what setup did you have @ the mid west race? Same as u posted before?

Okay, great. Lets see some footage guys. I can't believe FrankL is the only one on all of youtube that has posted one video of the 811e. Serpent should take some marketing tips from JQ. That guy has video everywhere.

same thing we went up in front shock oil.

ron ran a 2.3 rear bar. i thought it let the car roll to much so went back to the 2.5


i got a few more things i want try but my cars pretty dialed in for me indoor any way.

After my build, the only thing I dislike about this buggy is the really long motor wires. Not only are they long but they have to be run over the battery tray that you have to open after every run.

I'm considering chopping off the RX tray, and turning the RX8 so the posts point towards the motor. This moves the wires out of the way and shortens them a great deal.

not a bad idea really. i kinda got annoyed with the wires being there too, after a few batt swaps

will the esc fit if you turn it?

You need to grind the tray a bit to fit the RX8 sideways.

Hi everyone,

I'm having difficulty getting the Airtronics MT4 receiver to fit in the receiver box - everything is to tall and doesn't fit.

Anyone else having this issue?

hi guys wot would be the good set up for a outdoor clay track thing just wants to face the other way all the time ........cheers

Yes, radio box is a very small one

Most of the receivers will tight fit
Don't turn the screws all the way in , you should leave a little space
And you can cover with electric band of the sides

I Hope this will work

can someone post there esc settings for a tekin RX8 and tekin 1900kv motor, just finishing up the buggy and the esc/motor should be here early next week and will be racing it at motorama and will have little to no practice time so the more i can have it close to done the better

Thanks

hey guys. just picked my s811 be up , quality is great!. just wondering . is the buggy great out of the box besides personal set up? like is it a definate that i should get the webbed shock bladders. and is the box set up a good starting point. also i noticed that when mounting the upper shocks to the tower , i noticed on another guys buggy he had a silver coller or washer that goes on after the upper shock is on the pivot mount, i did not notice if they came with my kit . i just mounted the shocks on with the cap hex screw. please help thank you. hey frank l. great video . was the set up u had far from stock ?