Originally Posted by Dano628

Have you tried Exotech chassis ? I took .7 a sec off my laptimes on a 15 sec laptime track . Yes it cost a $100.00 but I didn't have to buy new batteries either . IMO thats pretty good bang for your buck .

Originally Posted by Evil Genius jr.

Thats for the 2wd. The 4wd uses the SCTE and slash protrac offset.

Originally Posted by thebizz

Marcus do run the b44 mount with the exotek chassis or the stock chassis

Originally Posted by Evil Genius jr.

Do you have pictures of your rcshox saddles installed?

Originally Posted by CoyoteSlash

There is nothing. wrong with running Stick packs. I think i'm one of the last guys running sticks at this point. (who's got more than 250.00 additional added to Truck) and I handle, balance, and lap Losi's just fine. Stick with what you've got and upgrade the Truck with some FT shocks or something for the price of getting a saddle pack or two.

Saddles can always come much later. Driving is always superior to any upgrade.

Originally Posted by MantisWorx

Second wave of center dif pre-orders is up now.

Originally Posted by Vegatron75

Still using the stick, tried the saddles and didn't like it.

I didn't have the yellow front springs though, and I was running the 1410. Made for a front heavy truck so.... I went back to the sticks, and I'm running a 5oz weight on the other side for counter balance.

Originally Posted by MantisWorx

the b44 conversion will not work with the Exotek chassis unless you drill holes. as far as i know you can either use the Exotek saddle conversion or RCshox. the Exo version lays them side by side (which i dont like at all) and the RCshox mounts them inline.