Jet Boating
05-31-2011 | 09:38 AM
#16
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
Ty, I noticed on the R/CU thread you had tried the water cooled 4800kv.
http://www.hobbyking.com/hobbyking/s...idProduct=8595
Do you think it would be OK if it was run on 2 cells?
http://www.hobbyking.com/hobbyking/s...idProduct=8595
Do you think it would be OK if it was run on 2 cells?
05-31-2011 | 12:20 PM
#17
Tech Adept
Joined: May 2011
Posts: 180
I would like one of these too, but I don't want to change the pump. What motor/esc combo would you reccomend to give it more power and speed, but not so much the stock pump explodes. Thanks, Charlie.
Oops, that's what I get for writing my reply before I watched the video. No need to answer my question again, I found where you answered it on the video page.
Oops, that's what I get for writing my reply before I watched the video. No need to answer my question again, I found where you answered it on the video page.
06-01-2011 | 07:58 AM
#18
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
I would like one of these too, but I don't want to change the pump. What motor/esc combo would you reccomend to give it more power and speed, but not so much the stock pump explodes. Thanks, Charlie.
Oops, that's what I get for writing my reply before I watched the video. No need to answer my question again, I found where you answered it on the video page.
Oops, that's what I get for writing my reply before I watched the video. No need to answer my question again, I found where you answered it on the video page.
06-02-2011 | 07:50 AM
#20
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
Looks good! Did you make that rideplate?
I took the Monster boat out for all of about 30 seconds, turns out the setscrew stripped in the motor coupler and it let go, letting the motor shaft free spin. Luckily the wind blew it back to shore, otherwise I was going wading. Put a new coupler on last night, lotctite this time!
I took the Monster boat out for all of about 30 seconds, turns out the setscrew stripped in the motor coupler and it let go, letting the motor shaft free spin. Luckily the wind blew it back to shore, otherwise I was going wading. Put a new coupler on last night, lotctite this time!
06-02-2011 | 01:00 PM
#21
Tech Initiate
iTrader: (1)
Joined: Aug 2010
Posts: 45
From: McEwen, TN
Looks good! Did you make that rideplate?
I took the Monster boat out for all of about 30 seconds, turns out the setscrew stripped in the motor coupler and it let go, letting the motor shaft free spin. Luckily the wind blew it back to shore, otherwise I was going wading. Put a new coupler on last night, lotctite this time!
I took the Monster boat out for all of about 30 seconds, turns out the setscrew stripped in the motor coupler and it let go, letting the motor shaft free spin. Luckily the wind blew it back to shore, otherwise I was going wading. Put a new coupler on last night, lotctite this time!
I still havent ordered a motor... Can't make up my mind. Too many choices.
06-02-2011 | 03:21 PM
#22
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
Go for a Feigao 2040SL 4400kV or something right around there, that's what I have in both of mine and the video kind of shows the speed and acceleration.
06-02-2011 | 09:04 PM
#24
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
http://www.radicalrc.com/category/Fe...ess-Motors-117
Second motor down, long series. Looks like they only have the 3867kV option as the highest, which should work pretty good too.
Or this one:
http://www.bphobbies.com/view.asp?id...34&pid=V184687
Second motor down, long series. Looks like they only have the 3867kV option as the highest, which should work pretty good too.
Or this one:
http://www.bphobbies.com/view.asp?id...34&pid=V184687
06-12-2011 | 08:55 PM
#25
Tech Rookie
Joined: Jun 2011
Posts: 1
Ty Campbell Jet Boat
Ty,
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
06-15-2011 | 07:37 PM
#26
Tech Initiate
iTrader: (1)
Joined: Aug 2010
Posts: 45
From: McEwen, TN
Ty,
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
http://www.rcuniverse.com/forum/m_79..._1/key_/tm.htm
06-16-2011 | 09:21 PM
#27
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
Ty,
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
I was wondering if you would be willing to e-mail me an itemized list of components and were to get them for a complete build on one of these amazing jet boats you were running in the creek in McCall, ID. I am from Spokane, WA. and play on upper Twin lakes, ID. I am new to the sport and currently have a formula fastech deep Vee and am getting the new pro boat mystic 29 catamaran when released in July but would love to build a jet while waiting.
Thank in advance Kevin
PS if you can't then any member who reads this and is willing to help me out I appreciate it.
06-20-2011 | 07:52 AM
#29
Thread Starter
Team Tekin
Joined: Mar 2006
Posts: 2,465
From: Tekin
That trailer is awesome!
I've been using my jetboats primarily for rescue boats lately, been running the P1 and just finished up the Super Hawaii yesterday! The creek by my house is a slow trickle now, not much fun anymore. Have to go find a new one.
I've been using my jetboats primarily for rescue boats lately, been running the P1 and just finished up the Super Hawaii yesterday! The creek by my house is a slow trickle now, not much fun anymore. Have to go find a new one.
