|
Cannot get my hw1.0 with the otg cable to work on my gen 1 rx8
Works fine.with all my other tekin rs, and rs pro's. Its displays the rx8 name on the top left corner though nothing pops up for setup or other mode changes. I'm using my Samsung S4 phone. Any suggestions or ideas anyone? |
Originally Posted by Rocktoy71
(Post 13529187)
Cannot get my hw1.0 with the otg cable to work on my gen 1 rx8
Works fine.with all my other tekin rs, and rs pro's. Its displays the rx8 name on the top left corner though nothing pops up for setup or other mode changes. I'm using my Samsung S4 phone. Any suggestions or ideas anyone? Go here and make sure you have the latest HW software on your PC: www.teamtekin.com/hotwire.html |
Im looking to upgrade my phone to a LG G3 I did some research and it supports USB OTG. Im gonna assume that is what I need. I know you said you cant check every device out there and all of you say to try it but I have not bought anything yet since i would like to make sure it works before I buy a hotwire2.0 and upgrade my phone to a G3.
So can you at least confirm that if my device supports OTG and its Android version is 4.4.+ it should work with the Hotwire 2.0? Provided I get the correct cable.... Thanks in advance for your reply Jake |
Originally Posted by Bubonic-X
(Post 13550000)
Im looking to upgrade my phone to a LG G3 I did some research and it supports USB OTG. Im gonna assume that is what I need. I know you said you cant check every device out there and all of you say to try it but I have not bought anything yet since i would like to make sure it works before I buy a hotwire2.0 and upgrade my phone to a G3.
So can you at least confirm that if my device supports OTG and its Android version is 4.4.+ it should work with the Hotwire 2.0? Provided I get the correct cable.... Thanks in advance for your reply Jake I'm running 4.4.4 on my S4 and have no issues. |
Originally Posted by Randy_Pike
(Post 13355867)
I also run the S4 and use this
http://www.amazon.com/Lindy-1m-USB-O...Lindy+%2331718 Just the one cable. Costs a bit more, but worth it in my opinion. |
Originally Posted by Bubonic-X
(Post 13552234)
So Randy this one takes out the cable that is supplied with Hotwire. It would go directly from the device to the Hotwire correct?
|
Originally Posted by Bubonic-X
(Post 13580699)
Can you guys answer this please!
|
Hey guys a while back ago somebody posted a cheap pad that came with an OTG cable from OfficeMax or Staples I can't seem to find it does anybody remember what it was?
|
To use the phone app will I need the new hotwire.?
|
Originally Posted by jsrocket13
(Post 13585976)
Hey guys a while back ago somebody posted a cheap pad that came with an OTG cable from OfficeMax or Staples I can't seem to find it does anybody remember what it was?
http://www.rctech.net/forum/electric...tekin-esc.html |
Originally Posted by UN4RACING
(Post 13586003)
To use the phone app will I need the new hotwire.?
|
Thanks Tinman.
|
Originally Posted by Randy_Pike
(Post 13586380)
No, both the Hotwire 1.0 and 2.0 can work the app. You need an OTG cable for your android device, download the app, etc.
|
S3 issues
I have bought the OTG cable and still can't get app to work on my Galaxy S3, is the phone too old to work. ESC will light up when plugged in but not recognizing gen2 rx8 or rs. Any help be greatly appreciated.
|
I use a s3 with otg no issues for me.
|
| All times are GMT -7. It is currently 11:50 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.