Channels crossed
 

I have a DX4R Pro, I have binded it to the stock receiver but when I pull the trigger the wheels turn and when I turn the wheel to steer the throttle engages and the truck pulls off. Can someone help ... also it does it with all 3 of my receivers

You have the esc and servo plugged into each of the receiver channels backwards. Switch them and that should fix the problem.

Naw they are in correct I have checked that multiple times and tried 2 other receivers with the same out come.

swap plugs and call it good

So if your running some older dsm rx with digital servos do u still need to change the frame rate to 5.5 or can it be fine at the default setting

I'm looking to buy this radio. Can anyone post where they bought there radio with a discount?

dx4r
 

Have you tryed L A parts house? Or nitrohouise?

SR 410
 

Is the SR410 capable of the 5.5 frame rate? When I select 5.5 and bind, it swaps back to 11? Just curious if it will do 5.5? My SR2000 works on 5.5

thanks.

I found the best deal from an authorized dealer on ebay.

Can you share who you bought it from? I know there's a hobby shop selling them on ebay buy me living in NYC the tax is too much. You get the radio with extra items.

That's the one. I got the Jconcepts backpack with mine. I sold the backpack for $50 so my net cost for the radio and shipping was less than any price I found anywhere else.

Since i absolutely hate aa batteries, here in a week or 2 i will convert it over to a life battery, ill post pics as i do it if anyone is interested

Well not sure what AA batteries did to make you hate them so much, but I just sold my DX3R and ordered a DX4R Pro.....kinda stoked. Never had a new Tx before (DX3R was used when bought) so this'll be a treat. And I can live with AA's, never did me any wrong. :p

I ordered it from my LHS and really, if you tell them how much you can buy one on-line for and if you can come close, I'll buy from you. Owner came back not only just close, but better. Never hurts to ask. And I like the fact that if I have any issues warranty-wise, I dont have to wait for email replies or packaging and shipping it only to find that its MIA after 2/3 weeks.
Some of you know what I mean. ;)

The SR410 is an 11ms receiver, the only DSMR receiver to my knowledge that is 5.5ms is the SR2000. The SR410 was the receiver that came with the DX4S radio, and for some reason they give you one with the DXR4 Pro in addition to the correct SR2000 receiver. I assume cause the SR2000 on it's own is a $100 receiver.

PB

Just picked up one from the seller on eBay in N.Y. and he threw in a Savox 1258 servo, nice. I will use the new servo and sell the old servo and radio(DX3S.) I race cross handed, so I need a L/H radio. The SR2000 rx doesn't hurt either, really nice speed and size, will fit perfect in my DEX410. I hope it binds to the blue rx's?