FlySky FS iT4 Transmitter Thread
#676
If it's like the NB4 you update the receivers from the transmitter. The receiver firmware updates are included with the transmitter firmware.
#677
Tech Rookie
Unfortunately it will not let me post the link here
Thanks!!!
Last edited by tvr4; 12-31-2019 at 05:43 PM. Reason: uopdate
#678
Tech Rookie
No output on 2 channels
Hi, got this all works fine with rx included with tx but have now bought the 4 channel svc rx to use.
have latest firmware on tx and rx but cannot get any output on channels 1 and 2 but seems ok with servos in channels 3 and 4 when operated by sw1 or other switch. Doesn't matter if svc is selected on tx or not and moving rx doesn't cause servo to move either as it should if svc turned on. Anyone else had same issue and resolved it. Saw someone mention it on another group but they have no solution. I have already sent rx back for new one in case it was faulty but still same issue.
have latest firmware on tx and rx but cannot get any output on channels 1 and 2 but seems ok with servos in channels 3 and 4 when operated by sw1 or other switch. Doesn't matter if svc is selected on tx or not and moving rx doesn't cause servo to move either as it should if svc turned on. Anyone else had same issue and resolved it. Saw someone mention it on another group but they have no solution. I have already sent rx back for new one in case it was faulty but still same issue.
Last edited by Nudge fpv; 05-11-2020 at 02:06 PM. Reason: Spelling
#679
Tech Initiate
Hows the latency on this transmitter? Is it better than flysky gt3c and gt5? And also can u adjust gyro settings with this one?
Thinking about getting this or the gt5.
Thanks to anyone who would answer.
Thinking about getting this or the gt5.
Thanks to anyone who would answer.
#680
Tech Apprentice
iTrader: (2)
Looking for firmware
Does anyone have the latest US firmware for this Transmitter? I have tried the firmware from their site, but the transmitter is not recognized when in firmware mode. I am currently running version 1.0.2.0 and wouldn't mind updating if there is a new version.
#681
Tech Apprentice
anyone have a dead fs-it4 for parts? I need a wheel adapter.
#682
I have this FS-IT4 radio that I have been keeping stashed away. It was pulled out two days ago to be used on VRC to see how it would work. I really like the touchscreen features, the weight and the overall performance upgrade it gives me over the Spectrum DX3 v.1. My only nick that I can report tonight is the steering wheel stops. The wheel goes right and left, but it now has a broken part or something slightly jamming the end of the physical motion of the wheel. If I can explain in a different way. The steering wheel turns, and it feels like there is a bump stop before the bump stop. I was wondering if this was common for these radios. I want to know if the transmitter is so delicate, I should watch for more damage. Is it something that just needs a breaking in period? This triggered an alarm to watch for cheaper equipment. Although the FS-it4 was outperforming the DX3 at the time, the durability of the steering mechanism may be in doubt.
#683
Tech Apprentice
my post above yours was looking for the part that has the stops on it. So.. yeah. if your part is broken, you can print one that I created.
https://www.tinkercad.com/things/8yocIsWtkSx-its4-v5
still a big hassle though. If yours breaks and you dont want to bother with it, PM me.
https://www.tinkercad.com/things/8yocIsWtkSx-its4-v5
still a big hassle though. If yours breaks and you dont want to bother with it, PM me.
#684
Ok I will remember this offer brother, Thanks!
#685
Tech Rookie
hi all ineed Flysky FS-IT4 update can not find i any where help please
#686
Tech Regular
Maybe I'm missing something but firmware can be found here:
https://www.flysky-cn.com/it4s-xiazai-1
Someone above noted an issue though and I can't comment on that as I don't own this radio.
https://www.flysky-cn.com/it4s-xiazai-1
Someone above noted an issue though and I can't comment on that as I don't own this radio.
#687
Tech Rookie
that for the FS-IT4S i need it for the FS-IT4 thx mate
#688
Tech Regular
#690
Tech Rookie
I found firmware:
1.0.1.0 DE and 1.0.2.0 US
links:
Google Drive - drive. google .com/drive/folders/1YNldDu5J-B1FYqw0G1mSMwBXvWUEQUr8?usp=sharing
Mega - mega .nz/folder/vplizCJA#k41Axc0zzIg2GAE3bryVWw
Yandex Drive - disk. yandex .ru/d/NL9qdfnxlNW5Kw
Remove spaces
1.0.1.0 DE and 1.0.2.0 US
links:
Google Drive - drive. google .com/drive/folders/1YNldDu5J-B1FYqw0G1mSMwBXvWUEQUr8?usp=sharing
Mega - mega .nz/folder/vplizCJA#k41Axc0zzIg2GAE3bryVWw
Yandex Drive - disk. yandex .ru/d/NL9qdfnxlNW5Kw
Remove spaces