R/C Tech Forums - FlySky FS iT4 Transmitter Thread

R/C Tech Forums (https://www.rctech.net/forum/)

- Radio and Electronics (https://www.rctech.net/forum/radio-electronics-137/)

- - FlySky FS iT4 Transmitter Thread (https://www.rctech.net/forum/radio-electronics/698265-flysky-fs-it4-transmitter-thread.html)

Quote:

Originally Posted by malaval_ren (Post 13671796)

I'm continuing to work with Flysky to solve my problem but :

I have replaced the two resources of types "RCDATA" inside file "Modelcraft GT4 v2 Firmware Update GT 207200.exe" by the ones from the file "Update firmware FS-iT4-US.exe" identification 900 and 901.

The update process has worked perfectly, but I does some collateral damage in the software level.

Flysky FS-iT4
Version 1.02US
Hardware 1.0
07-12-2013
TX ID: 0150BAB4

A new menu item is present "i-BUS setup" on "RX setup" :

Where can I find documentation about it, please ?
Where can I found information about i-Bus, please ?

Any ideas, please ?

Great news, I got an email from Flysky :)

The FS-iT4 has an FACTORY MODE :)

With it, I could calibrate throttle and steering and fix the most important of the collateral damage.

Regards,
Renaud

Where do you get to a screen where you can calibrate throttle and steering endpoints? I really need to do this.

Flysky fs-it4 cracked screen

I have a Flysky fs-it4 with a cracked screen
Does anyone know where I can buy a new screen

Hello everyone, I am Jason from flysky, for all these issues please submit a bug report in our vendor section in the RCGroups forums.

Best Radio I've ever owned!

I've owned all the big names and this radio is right there with all of them. I haven't had one damn problem.I think some people were paid to discredit this radio or something.I race 1/10 scale TC indoors and out. This radio can dial in and out steering,throttle.it has expos.Just to name a few.Yeah it a tad bit light but it functions very well! I love this Radio and have no plans on following the hoards of people using the same radio hahaha! Be different get a Flysky Fs it4

Quote:

Originally Posted by Matt Howard (Post 11751776)

someone posted that the latency is 5ms. Just setting mine up tonight and I didn't notice any lag at all. The reciever takes up a bit more space than what I'm used to, hopefully they come out with just regular 2 channel ones to cut down on the size, I really don't need 4 channels:p

Yes it is very fast. And if you race 4 channels is adequate. Just think servo,esc,transponder,and motor fan..

Any one have fs-it4s if so what ver. Is it. And can channel 3&4 servo be set with differance speeds.

Receiver FS-IA4B dead after RX update

Hello my name is robert and iam glad to found that great forum.
I have a FS-4ITS and 2 pieces FS-IA4B receivers , the bus module FS-CEV04, some sensors to. All bought two months ago - The delivered FW version was 1.07-CN dated from 06-08-2015. My HW version is 2.1.
Everything worked smoth, some days ago i upload the new FW
called 19-08-2016 from the HP of flysky
After some troubles to upload it in the gun(the USB Emulator have to be enabled in setup) the display show that version 1.09-CN from16-03-2016 .
Following the new manual (same site as above) also the RX FW can be updated through the TX wireless.
As i dont know which FW i have ( find no way ) i select in the gun menue "RX setup" and "Update receiver". Also after some tries the dialog box opened and the new FW get flashed-dont remember the version number.
After that everything is running smooth.
Cant find a way to see the RX FW version, but when i try to "update receiver" again, the dialog "Already newest version" comes up.
So everything is fine....TILL i tried to update my second receiver.
First - in the "RX-Update" the RX get no communications, after some tries it start flashing -comment like "flashing version xx and some progress .." it stopped and display interuption or similar expression on flashing fw.
THATS IT-- i can do what i want,"Factory reset" "RX-setup" pressing the reset button(on the backside/bottom on the Receiver(little hole in the cover) no reaction at all the RX symbol is red on the TX screen.
No binding possible, LED is flashing slow, press the reset button during power up or down or "operation" no reaction. So only flashing from the RX LED.
SO please help, what can i do ?
Is there a way or a SW to connect a cable to the RX to reset or make a new FW flash or "whatever" to bring the RX back to live ?
Thanks for every info-please help
Robert

For the FS-iT4 users, Flysky have stop making 4 channel receivers (FS-iR4) to suit as the new ones for the S model are not compatible. Only GR3F, GR3E, R6B and R9B. So message them on Facebook and tell them to remake a 4 channels for the iT4

Thanks Blui3 for your help :-))

Sorry about my bad english here, but i have a S model Tx and want to solve that communication problem with the "new" FS-IA4B receiver NOT the previous one (FS-iR4).
Robert

Quote:

Originally Posted by dontknow (Post 14665927)

Maybe your got a dud receiver, I've had one out of eleven FS-iR4. I've got a second controller so I was able to check that it was just the receiver not working.

The price is attractive, how does this compare to a Sanwa mt4s or m12s? Anyone been able to test both for performance?

Hi, I'm looking at this radio as an alternative to the Kyosho KT-423PT. I would like to use it on my Mini-Z and on my 1/10 cars. Does this radio indeed support the Mini-Z?

Cheers,

Hugo

I just learned it does. I can buy one second hand, from which hardware / firmware versions is it safe to buy, are the binding issues and such fixed?

Cheers,

Hugo

Quote:

Originally Posted by HugoW (Post 14730244)

I just learned it does. I can buy one second hand, from which hardware / firmware versions is it safe to buy, are the binding issues and such fixed?

Cheers,

Hugo

Buy the new FS-iT4S and binding issues was fixed before the S model came out.

Thanks for your quick reply. Can you tell if this is an -S?

http://i.marktplaats.com/00/s/NTYzWD...YGdyd/$_85.JPG

I don't think it is. If not, my previous question still stands.

Cheers,

Hugo