I think you should ask this in the b4.2 thread. unless you get a bigger ma lipo then you would want to gear down for a couple of run to test out the bigger ma lipo. if it make any sens to you.

I do :P I run the highest ratio of 34/69. It is a bit hot so I would say a little lower on the pinion with the 69 spur is a good match. I only run stock no timing tho.

Hi there, Danny doesn't have a distributor in France but he will ship to you via UPS, contact him here. [email protected]

Cheers Justin

Thanks mash.
I figured asking about SMC motors specifically in he SMC thread would get me a quicker answer.

Hi Jpm1,

Thank you very much for the info.
I will contact them.
Bye !

Any word on when the factory race spec 3s 6500 will be in stock?

my 2s 6500 70c have come into balance don't know how or why, maybe they just wanted more cycles. still have great power and punch that never changed.

Has anyone had any experience with the SM-1 motor? I've been using an outdated Epic based 7.5 and I'm trying to get a motor with about the same power so I'm thinking an 8.5 will do it. Does anyone have any ideas about it?

I'm running a 6.5 SM-1 motor in my DEX410.

I don't think power will be an issue. I run a small track and have the forward power in the ESC turned down to 60%.

They are OK - I have 2 of them. I would say a little underpowered.

i have a 10.5 and have never needed more power. I regularly out power people during races. I've been pretty happy with it.

Well, I guess I can just get the 8.5 None of the tracks I drive on are very large so it should be fine!

Now I just need to choose between the shorties or saddles -.- decisions decisions…

I have used there 10.5 it had more torque and less rpms than my d3.5. You just have to hear a little higher.

Just a question but does any one know when the 4s 3500 will be in.

Hi, I'm totally new to this, just ordered a Savage Flux and a 308duo icharger. So I need some batteries. I was looking at a pair of SMC 2s 6500 70C, or a pair of 3s 5600 60C. What is going to be the best for my truck and me. I was leaning towards the 2s because everyone says the truck runs great on them, but my cousin just got a Vorza and he thinks 3s and turn it down a little is the way to go. I will mostly just be fooling around, no monster bashing (yet!! ) I think the SMC are the way to go, mostly because of the activity of Danny in the boards. It shows a pride, and a desire to produce a great product. Any and all help appreciated!