Hi guys, I heard that it's being released a new FLOW and brushless motors........ Are these things real ? If yes someone knows new features ? Thanks a lot

It still has two buttons.

And I didn't see a box anywhere. Might check closer tomorrow.

Aussie guy Simon Nicholson is also using a prototype.

With the current Flow software, what's a good setting for 1/12th 3.5 modified?

FYI LRP in Germany have advised that the Bridge Spec V2 does not work with MAC OSX 10.10.2.

Be keen to hear from anyone who has managed to get it going...

Thanks to John D from jdandracing.blogspot.com for the awesome pit photos and espionage from the ETS season finale. Check out his blog for more cool photos and videos.

This is the prototype LRP speedo from Volker's car. take a look at the aluminum bottom case!
http://4.bp.blogspot.com/-OTkBgb2H4T...626_152945.jpg

That's the same as he was running at AOC I mentioned earlier.

Any more information from them?

I just purchased an LRP Flow Works ESC, haven't used one before. I run 13.5 boosted, do I need the latest software update or is the standard one ok?

SPECIAL LIMITED TIME EXCHANGE OFFER!

SAVE $75 on an LRP Flow Works Team ESC (#80970)! That's $124.99 for the current WORLD CHAMPION technology! This is REAL German Engineering at a truly budget price!

...and FREE shipping in the USA!!!

It's as easy as 1-2-3.

1) Go to www.LRP-America.com/service/ and fill out the form noting in the comment box "Exchange - I want a FLOW Works Team for $124.99". We will send you an email with an RMA Ticket #.
2) Mail us ANY brand ESC, working or not, with the RMA Ticket number we provided you on the outside of the box.
2) We will then email you a $75 coupon code good for a brand new Flow Works Team BL ESC. Place your order through LRP America's website using the coupon code provided to save $75!

BONUS: While this promotion lasts, and if you request, we will unlock the full potential of your Flow Works Team ESC buy providing you a FREE firmware update to suit your type of racing (Stock Only, Modified off-road, Modified on-road, or with reverse).

The fine print:
- This offer is valid only in North America. Canadian customers must add $19.50 for shipping and handling.
- When shipping your old ESC to us, only use a shipper that provides you with a tracking service such as USPS, UPS and FedEX.
- LRP America is not responsible for items lost in transit.
- Program starts 7/10/15 and supplies are limited.
It would give us a great pleasure if our press release is taken into consideration for your next issue or for your homepage.

LINK: http://www.lrp-americastore.com/exchange

Anyone having issue with removing the factory wires? The solder they used seems to have very high melting temperature. even at 850F I couldn't remove it...

Trim the wires off very close to the board first. That worked for me.

Also use a large chisel tip. Small tips lose heat much faster. Same idea as mach10's suggestion (less wire = less mass for heat to be absorbed in)

Hey guys I was just wondering what firmware comes with the LRP Flow Comp ESC straight out the box? I just bought the ESC maybe about 2 weeks ago. Also was wondering what setup on the ESC should I use. I'm running a BD7 with a 13.5T X20 motor on a fairly large track. What ESC settings should I run at with boost and what gearing? Also, I cant pair my remote and esc together. I hold the set button but nothing happens. When I turn on the car the mode led just turns blue and red, any info? Thanks!

Check on this link, version 1.4
https://www.lrp.cc/en/service/software-update/

As above, would be v1.4 out the box.

If you're running boosted 13.5 would be better to update to one of the newer firmware. There is one for onroad mod motors and another for onroad stock motors such as yours that offers more tailored boost and turbo values. As well as the new brake profiles etc.