Im new with this setting stuff, i had the rx8 and this just blows it away especially on how many settings you can do. I thought the lower voltage cutoff would help. But ill try it at 6.2 on friday, if i get the same problem what do i do and if there is a red and orange light?

up the cut off temps on the esc and motor

esc should be at 220-230
and motor disables or at 220-230

i disable the motor cut off and just get gearing right and set it and forget it.

ya my buddy said that the tekin and the viper esc dont read fully or something like that im not sure, so he told me to disable the motor cut off. Thanks, hopefully I dont have any problems at ocrc friday.

also when is the date that the 550 motors will be coming out? I preordered one yesterday. http://www.amainhobbies.com/product_...-550-Motor-45T

I think it's going to a few more weeks...

But it should be very soon

Check em out also at
premierehobbies.com

:eek:Sweet, im just gonna order it from there since i got my esc there

well i just got my brand new 10r esc and 7.5 motorfor my 2wd and was working and then just completely shut down and wont come back one.

Any help?

Hey Cult, Give me a run down of exactly what went down. Ill try to help but most likely you will have to send it in.

i was about to set up my esc fwd reverse and that and all the sudden it like glitched like the motor gassed about a milla sec and then it shut down and tried 3 different batteries just to see if it was my battery but still doesnt work

Hey guys just gatta put this out there. Last week I got a speedo and it was DOA out of the box. made a phone call.. mind you just one phone call and even over a holiday weekend I have a new speedo installed in my car and it is working great over a total of 4 days.. Viper is A++ in my book so far just can't wait to take it out to the track for testing tomorrow. If you have any problems these guys will take care of you that is for sure..

Thanks a ton Team Viper..

it is 1/8 esc / motor ready yet ?

No. We are finishing up testing on the Motors as we speak, everything is looking great.

The speedo's havent hit here for testing yet. Should start speedo testing in the next few weeks.

im just going to ask, Did you read the thread at all?

over the last 4 pages that question has been asked at least 2 times per page and has been awnsered just ONE PAGE back.. Just asking is all. ;)

glad you got your replacement.

we are a new company there is bound to be issues we are getting everything sorted out! :nod:

Thank you... i wanted to say that... but i didnt want to be the dick. Lol