![]() |
Originally Posted by rocketron
(Post 14149044)
You should be fine without reversing - several have gone to 3 gear Kyosho without needing to reverse rotation. On the V3.1 esc there is no option to reverse the rotation.
|
Are there any plans to make the firmware updates available for Mac users?
|
Originally Posted by brighty
(Post 14157636)
Are there any plans to make the firmware updates available for Mac users?
|
So in that case, do many guys run the stock firmware with mod motors? Have read elsewhere that there is additional timing build into the stock firmware thats not suitable for mod motors?
|
All good, managed to get the old PC working again. First question still stands though...are there any plans to make it available on MAC?
|
Hi guys
I would like to know what you guys would like to see from us in the future ex:Tech support,Products,Software etc . let us know what you think we are doing wright and what we are doing wrong . open for discussion so please respond your feedback means alot to me . ps :I dont actually race as i have no time or do i know setups but i am the person to go to when something really goes wrong with your hardware and software thats for sure tech wise |
Originally Posted by brighty
(Post 14158993)
All good, managed to get the old PC working again. First question still stands though...are there any plans to make it available on MAC?
|
Originally Posted by COBRARACING
(Post 14162070)
Hi guys
I would like to know what you guys would like to see from us in the future ex:Tech support,Products,Software etc . let us know what you think we are doing wright and what we are doing wrong . open for discussion so please respond your feedback means alot to me . ps :I dont actually race as i have no time or do i know setups but i am the person to go to when something really goes wrong with your hardware and software thats for sure tech wise |
Originally Posted by COBRARACING
(Post 14162070)
Hi guys
I would like to know what you guys would like to see from us in the future ex:Tech support,Products,Software etc . let us know what you think we are doing wright and what we are doing wrong . open for discussion so please respond your feedback means alot to me . ps :I dont actually race as i have no time or do i know setups but i am the person to go to when something really goes wrong with your hardware and software thats for sure tech wise |
What's the difference between the V3_508_No_Timing and the V1_508_No_Timing?
I have an old Justock I just installed, went to check for a newer flash and the V3 was on the dropdown to select, so I flashed it to V3. Recalibrated and re-setup my ESC. Haven't driven the car but it ran on the workbench just fine. |
Originally Posted by RotorTruck
(Post 14164753)
What's the difference between the V3_508_No_Timing and the V1_508_No_Timing?
I have an old Justock I just installed, went to check for a newer flash and the V3 was on the dropdown to select, so I flashed it to V3. Recalibrated and re-setup my ESC. Haven't driven the car but it ran on the workbench just fine. |
Originally Posted by COBRARACING
(Post 14164853)
v3 508 has improved brakes
|
can we have a waterproof Stock Spec version as well, I'm sure this would sell very well in Europe, especially here in the UK where we have a lot of rain and race outside all year round
|
Originally Posted by Bar
(Post 14165857)
can we have a waterproof Stock Spec version as well, I'm sure this would sell very well in Europe, especially here in the UK where we have a lot of rain and race outside all year round
|
Does the new XR10 Justock use brand new firmware? Or is it same as the previous Justock?
|
| All times are GMT -7. It is currently 12:01 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.