NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
Tech Fanatic
iTrader: (45)
I've got a v2.1 120a xerun esc and running an 8.5t motor in an associated b44.1 i want to run some timin and boost to make it keep up with the guys running 6.5t motors which software should i use (stock boost timing or mod with boost) and wahts is a nice mild boost and timing profile to use. Thanks
thanks guys, Multifuncton is the one I wanted, now have it. most are still selling the 2 in 1 box PRO box.
anyone want to share setting for 1s 13.5 WGT?
anyone want to share setting for 1s 13.5 WGT?
Tech Lord
iTrader: (86)
Tech Apprentice
Hello guys, I'm new to hobbywing esc and electric car.
I have a v2.1 and I want to learn something about this esc, working mode, firmware update (original firmware, mod firmware?).
I don't know which possibilities offers the firmware to get the best from my esc, but I know that the world about these firmwares is so big, where can I read something ?
Thanks.
I have a v2.1 and I want to learn something about this esc, working mode, firmware update (original firmware, mod firmware?).
I don't know which possibilities offers the firmware to get the best from my esc, but I know that the world about these firmwares is so big, where can I read something ?
Thanks.
Hello guys, I'm new to hobbywing esc and electric car.
I have a v2.1 and I want to learn something about this esc, working mode, firmware update (original firmware, mod firmware?).
I don't know which possibilities offers the firmware to get the best from my esc, but I know that the world about these firmwares is so big, where can I read something ?
Thanks.
I have a v2.1 and I want to learn something about this esc, working mode, firmware update (original firmware, mod firmware?).
I don't know which possibilities offers the firmware to get the best from my esc, but I know that the world about these firmwares is so big, where can I read something ?
Thanks.
I've got a v2.1 120a xerun esc and running an 8.5t motor in an associated b44.1 i want to run some timin and boost to make it keep up with the guys running 6.5t motors which software should i use (stock boost timing or mod with boost) and wahts is a nice mild boost and timing profile to use. Thanks
Use 930mod
Tech Adept
hi I have a HW 1s that I bought second hand, the seller did not include the heatsink. Will I need the heatsink if I were to run 2s 10.5t pan cars and TC? Or will a bracket + fan be OK? If not where can I get the heatsink separately? Thanks.
edit: I have some heatsinks cannibalize from a dead pc. Will that work if I stuck it on with heat grease + ratchet ties? (ugly but don't know where to get heatproof double sided tape).
edit: I have some heatsinks cannibalize from a dead pc. Will that work if I stuck it on with heat grease + ratchet ties? (ugly but don't know where to get heatproof double sided tape).
Tech Rookie
Is it a v2.1 or a v3 / v3.1? As far as I know you cannot run 2s on the newer 1s speedos, at least thatīs what the manual claims.
Tech Adept
I bought it a while ago so I think I'm OK with 2s.
Tech Elite
iTrader: (2)
OK, a bit of an "out there" question. Does anyone know where I can get new bearings for the Hobbywing Xerun motors?
I have a couple of Hobbywing Xerun motors that still work good except the bearings are starting to get a bit noisy, and I'd like to be able to just replace the bearings rather than having to get a new motor.
Cheers
Rob.
I have a couple of Hobbywing Xerun motors that still work good except the bearings are starting to get a bit noisy, and I'd like to be able to just replace the bearings rather than having to get a new motor.
Cheers
Rob.
Tech Elite
iTrader: (31)
OK, a bit of an "out there" question. Does anyone know where I can get new bearings for the Hobbywing Xerun motors?
I have a couple of Hobbywing Xerun motors that still work good except the bearings are starting to get a bit noisy, and I'd like to be able to just replace the bearings rather than having to get a new motor.
Cheers
Rob.
I have a couple of Hobbywing Xerun motors that still work good except the bearings are starting to get a bit noisy, and I'd like to be able to just replace the bearings rather than having to get a new motor.
Cheers
Rob.
http://www.hobbywing.com/product_show.asp?id=268
It states: Size: 3.175mm(Internal diameter) * 9.525mm(External diameter) * 3.967mm(Height)
I'd go grab the right size from your favourite supplier.
Phil.
Tech Addict
iTrader: (13)
Any idea when the V3.1 1S will be ROAR approved?
Thanks.
Thanks.
Hi guys
Just to let you know i dont have a confirmed date of release of the updated v10 motors series orvthe confirmed roar approval date.
I can confirm we do have a bandit series of the v10 coming soon for club racing or for racers who want enormous power but dont run sanctioned events.
We also have a special esc to be released next feb 2014 in time for titc and special for zero timing .it will be called the HW Zero based around the v3.1 series.
Thanks for reading guys
Angelo
Just to let you know i dont have a confirmed date of release of the updated v10 motors series orvthe confirmed roar approval date.
I can confirm we do have a bandit series of the v10 coming soon for club racing or for racers who want enormous power but dont run sanctioned events.
We also have a special esc to be released next feb 2014 in time for titc and special for zero timing .it will be called the HW Zero based around the v3.1 series.
Thanks for reading guys
Angelo
Tech Addict
iTrader: (13)