R/C Tech Forums - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE

- - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE (https://www.rctech.net/forum/radio-electronics/393690-new-hobbywing-stock-supercharged-software.html)

ta04evah

11-20-2012 06:24 PM

Quote:

Originally Posted by Johnny-RC (Post 11462287)

Good to see HW has finally realized what we have been saying. Brakes in Blinky are soft. Back when I brought this up it was dismissed as needing to check my Tx settings and something else. Thanks HW I hope this can be fixed soon.

I believe that was originally posted by Angelo a few months ago. :rolleyes:

Any news, updates, progress etc in relation to the soft brakes in blinky mode yet?
Am loving my hobbywing stuff and recommend it to others, but throw us all that run blinky mode a bone here please Angelo.

Cheers
Rob.

Sir Tamiyalot

11-20-2012 06:35 PM

Quote:

Originally Posted by Johnny-RC (Post 11462313)

I think the Extreme stock was originally designed for 17.5 Touring Car running boost. This is why its only ratted down to an 11.5 motor. I have heard guys say you can run down to a 8.5 with no boost or turbo (cant confirm that though). I have however run a Extreme stock esc with a 10.5 boosted in 2wd SCT with no problem.

The 60amp Xerun is ratted down to 8.5 so its just a more beefy esc and the reason why its larger then the Extreme stock. They both use the same software and are both ROAR legal for blinky, just like the 120 amp Xerun.

You can run boost on a 8.5t for on road or no boost on a 5.5t motor with the extreme stock.

ScottyTC4NZ

11-20-2012 10:31 PM

Quote:

Originally Posted by chris_dono (Post 11461615)

Check the sensor cable is fully seated in the speedo itself, we had one on the weekend that acted just as you describe and it turned out to be that the cable was slightly out of the socket at an angle.

Hi thank for the advice.

Went down to the track again tonight check all that and even changed the receiver, was running good, then about 4mins into run started to do it again. unless its coming lose during run

So its got me beat.
I have PM Angelo but herd nothing yet.

rcuser67898578

11-21-2012 08:16 AM

COBRARACING

11-21-2012 04:48 PM

Quote:

Originally Posted by ScottyTC4NZ (Post 11465216)

All fixed .

COBRARACING

11-21-2012 04:49 PM

please email me for tech support .

[email protected]

[email protected]

I dont really like the pm system on rc tech plus i can send you files and more info via email

COBRARACING

11-21-2012 04:51 PM

Hi guys

I have two new files for the usb link that sort out some bugs like throttle cut out etc and more

please email me and i will send you out the files and instructions on how to install the files

[email protected]

[email protected]

regards Angelo

Pro10noob

11-21-2012 11:18 PM

@Angelo.......Still searching for the part i e-mailed you about.
No luck anywhere.

regards Roy

ScottyTC4NZ

11-22-2012 12:27 AM

Quote:

Originally Posted by COBRARACING (Post 11467726)

All fixed .

Hi Angelo

Been great talking to you, thanks for all the help.

Thank you

Foodie

11-22-2012 02:40 AM

Angelo: I have asked in some mails regarding Amp Limit and Amp turbo if you could make something like that in the V3, is that possible?

sosidge

11-22-2012 08:19 AM

Quote:

Originally Posted by COBRARACING (Post 11467731)

Why don't you just release the files on the Hobbywing website instead?

rcuser67898578

11-22-2012 08:24 AM

COBRARACING

11-22-2012 07:57 PM

Quote:

Originally Posted by Pro10noob (Post 11468878)

@Angelo.......Still searching for the part i e-mailed you about.
No luck anywhere.

regards Roy

cpd racing uk has been trying to get in contact with you for a while now they have the heatsink for you .

please email them

COBRARACING

11-22-2012 08:01 PM

Quote:

Originally Posted by Foodie (Post 11469138)

Angelo: I have asked in some mails regarding Amp Limit and Amp turbo if you could make something like that in the V3, is that possible?

Had a a long talk with michael and he has told me that these features are not needed which i agree but there is an rpm limiter external to the esc which we are working on which will limit your rpm thus keeping your motor cooler .

To many features confuse the customer and ive been told this by many high end racers .

COBRARACING

11-22-2012 08:05 PM

Quote:

Originally Posted by Johnny-RC (Post 11469898)

"and more." does the and more part address the soft brakes in blinky?

In blinky software for the v3 its the same as mod or stock all your actually doing is placing the boost and turbo to zero whih in turn blinks the red led stating zero timing no difference from zero to mod same programs for the v3

do you use any drag brake ?are you radio settings correct ? please take a look at these please as i have done my own testing and i see no problem with brakes .You could also have to much brakes and think not enough as you might be skidding/gliding .

I had a touch of drag brake and 1/2 brakes and had more than enough brakes .

Im told that they have heaps of brakes for turbo and boost but not enough for zero timing how can that be possible when it is the same program but turob set to zero and boost too zero ?

All times are GMT -7. It is currently 07:20 AM.

Page 678 of 837

678

Show 40 post(s) from this thread on one page